Infrared Photodetectors Based on Reduced Graphene Oxide and Graphene Nanoribbons

@article{Chitara2011InfraredPB,
  title={Infrared Photodetectors Based on Reduced Graphene Oxide and Graphene Nanoribbons},
  author={Basant Chitara and Leela Srinivas Panchakarla and S. B. Krupanidhi and C. N. R. Rao},
  journal={Advanced Materials},
  year={2011},
  volume={23}
}
The use of reduced graphene oxide (RGO) and graphene nanoribbons (GNRs) as infrared photodetectors is explored, based on recent results dealing with solar cells, light-emitting devices, photodetectors, and ultrafast lasers. IR detection is demonstrated by both RGO and GNRs in terms of the time-resolved photocurrent and photoresponse. The responsivity of the detectors and their functioning are presented. 

Infrared Photodetectors Based on CVD‐Grown Graphene and PbS Quantum Dots with Ultrahigh Responsivity

Infrared photodetectors based on single-layer CVD-grown graphene and PbS quantum dots, which are fabricated by solution processing, show ultrahigh responsivities of up to 10(7) A/W under infrared

Improved Performance of All Solution-Processed Graphene Photodetectors via Plasmonic Nanoparticles

A cost-effective approach of building graphene-based photodetectors with Ag nanowires (AgNWs) as the contact electrode on the glass substrate via solution process has been developed. The

Fast and enhanced broadband photoresponse of a ZnO nanowire array/reduced graphene oxide film hybrid photodetector from the visible to the near-infrared range.

In the present work, a ZnO nanowire array/reduced graphene oxide film hybrid nanostructure was realized, and the photovoltaic responses from the visible to the near-infrared range were investigated.

Laser-scribed highly responsive infrared detectors with semi-reduced graphene oxide

Graphene-based optoelectronic devices, including reduced graphene oxide (RGO) devices, commonly exhibit a large dark current and low on/off ratio with high dark-power consumption and a small

Opposite photocurrent response to ultraviolet and visible light

We have designed and fabricated a novel photodetector that is composed of sandwich-structured n-type zinc oxide nanorods arrays, p-type polyaniline thin film, and dye-modified n-type ZnO nanorods

Design of Graphene Based Photodetector with High Absorption and Responsivity

In this paper, a novel structure of photodetector consisting of periodic layers of graphene and silica located on a metal film with groove rings of silica is proposed. The excited localized Plasmon

Mechanistic view on efficient photodetection by solvothermally reduced graphene oxide

Despite of the progress, graphene based photodetectors still suffer from very low responsivity. Tunable optical properties and ease of preparation of has made reduced graphene oxide (RGO) a promising
...

References

SHOWING 1-10 OF 49 REFERENCES

Position dependent photodetector from large area reduced graphene oxide thin films

We fabricated large area infrared photodetector devices from thin film of chemically reduced graphene oxide (RGO) sheets and studied their photoresponse as a function of laser position. We found that

Device Model for Graphene Nanoribbon Phototransistor

An analytical device model for a graphene nanoribbon phototransistor (GNR-PT) is presented. GNR-PT is based on an array of graphene nanoribbons with the side source and drain contacts, which is

Transparent, conductive graphene electrodes for dye-sensitized solar cells.

Transparent, conductive, and ultrathin graphene films, as an alternative to the ubiquitously employed metal oxides window electrodes for solid-state dye-sensitized solar cells, are demonstrated and show high chemical and thermal stabilities and an ultrasmooth surface with tunable wettability.

Chemically Derived, Ultrasmooth Graphene Nanoribbon Semiconductors

We developed a chemical route to produce graphene nanoribbons (GNR) with width below 10 nanometers, as well as single ribbons with varying widths along their lengths or containing lattice-defined

Organic solar cells with solution-processed graphene transparent electrodes

We demonstrate that solution-processed graphene thin films can serve as transparent conductive anodes for organic photovoltaic cells. The graphene electrodes were deposited on quartz substrates by

Lower-defect graphene oxide nanoribbons from multiwalled carbon nanotubes.

The new, optimized method, which introduces a second, weaker acid into the system, improves the selectivity of the oxidative unzipping presumably by in situ protection of the vicinal diols formed on the basal plane of graphene during the oxidation, and thereby prevents their overoxidation and subsequent hole generation.

Organic photovoltaic cells based on an acceptor of soluble graphene

In this paper, an organic photovoltaic device based on an acceptor of solution-processable functionalized graphene was designed. A short circuit current density (Jsc) of 4.0mAcm−2, open circuit

Graphene Nanoribbon Phototransistor: Proposal and Analysis

We consider a concept of a graphene nanoribbon phototransistor (GNR-PT) based on an array of GNRs operating as a photodetector of far-infrared (FIR) and terahertz (THz) radiation. The photodetector

Graphene photodetectors for high-speed optical communications

A graphene-based photodetector with unprecedented photoresponsivity and the ability to perform error-free detection of 10 Gbit s−1 data streams is demonstrated. The results suggest that

Ultrafast graphene photodetector

This work demonstrates ultrafast transistor-based photodetectors made from single- and few-layer graphene that do not degrade for optical intensity modulations up to 40 GHz and suggests that the intrinsic bandwidth may exceed 500 GHz.