Influence of artificial body fluids and medical sterilization procedures on chemical stability of Parylene C

@article{Beshchasna2010InfluenceOA,
  title={Influence of artificial body fluids and medical sterilization procedures on chemical stability of Parylene C},
  author={N. Beshchasna and B. Adolphi and S. Granovsky and M. Braunschweig and W. Schneider and J. Uhlemann and K. Wolter},
  journal={2010 Proceedings 60th Electronic Components and Technology Conference (ECTC)},
  year={2010},
  pages={1846-1852}
}
  • N. Beshchasna, B. Adolphi, +4 authors K. Wolter
  • Published 2010
  • Materials Science
  • 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC)
  • Among materials suitable for flexible encapsulation poly-para-xylylene (Parylene C), often chosen as protective coating for biomedical devices and variety of anticorrosion applications due to its favorable chemical and biological resistance, high thermal stability, low water vapor absorption, permeability, high biocompatibility as well as excellent dielectric and mechanical properties, is one of the most promising. In spite of a wide use only few systematic studies on biological and chemical… CONTINUE READING
    13 Citations

    Figures and Tables from this paper.

    Characterization and Modification of Adhesion in Dry and Wet Environments in Thin-Film Parylene Systems
    • 4
    • PDF
    Optimizing Parylene C Adhesion for MEMS Processes: Potassium Hydroxide Wet Etching
    • 18
    Techniques and Considerations in the Microfabrication of Parylene C Microelectromechanical Systems
    • 15
    • PDF
    Evaluation of post-fabrication thermoforming process for intracortical Parylene sheath electrode
    • B. Kim, S. Hara, +7 authors E. Meng
    • Materials Science
    • 2013 6th International IEEE/EMBS Conference on Neural Engineering (NER)
    • 2013
    • 3
    • PDF
    The effect of Parylene coating on the surface roughness of PMMA after brushing.
    • 19
    • PDF
    Emerging Encapsulation Technologies for Long-Term Reliability of Microfabricated Implantable Devices
    • 9
    • PDF

    References

    SHOWING 1-10 OF 25 REFERENCES
    Characterization of parylene‐N and parylene‐C photooxidation
    • 58
    Characterization of low-temperature wafer bonding using thin-film parylene
    • H. Kim, K. Najafi
    • Materials Science
    • Journal of Microelectromechanical Systems
    • 2005
    • 120
    Parylene as a Chronically Stable, Reproducible Microelectrode Insulator
    • 226
    • PDF
    Reactivity of ethylene oxide in contact with basic contaminants
    • 3
    • PDF
    Polymeric Confonnal Coatings for Implantable Electronic Devices
    • 18
    Fundamental Principles of Polymeric Materials
    • 510