Influence of Powder Particle Size Distribution on the Properties of Press-and-Sintered Titanium and Ti-6Al-4V Preforms

@article{Bosman2014InfluenceOP,
  title={Influence of Powder Particle Size Distribution on the Properties of Press-and-Sintered Titanium and Ti-6Al-4V Preforms},
  author={Hendrik L. Bosman and D. C. Blaine},
  journal={Advanced Materials Research},
  year={2014},
  volume={1019},
  pages={225 - 230}
}
The potential to control the final properties, as measured by density, strength and microstructure, of press-and-sintered titanium and master alloy Ti-6Al-4V is investigated by designing and evaluating bimodal particle size distributions of the relevant powders. Ratios of 1/3, 2/3 and 1/1 by volume of coarse to fine powders, as determined by particle size peaks, were blended from -200 and -100 mesh commercially pure titanium powders and -200 mesh 60Al-40V master alloy powder, in the case of Ti… 

Investigation of the experiment and simulation on TiH2 powder packing by a novel irregular 3D model

Density and porosity have an important influence on powder metallurgy products, and it is feasible to predict the tap density of powder by simulating the packing of powder. Analysis models of

Grade 2 ve Grade 5 Titanyum Tozlarının Sıkıştırılabilme Karakteristikleri Üzerinde Yağlayıcı Etkisinin Araştırılması

TLDR
Toz Metalurjisi (TM) ile uretilen titanyum alasimi urunler bircok endustriyel alanda ve ozellikle de, tip alaninda kullanilmaktadir, darbe deneyleri ve SEM-EDS analizleri de uygulanmistir.

References

SHOWING 1-3 OF 3 REFERENCES

Review of densification of titanium based powder systems in press and sinter processing

Abstract The development of novel extractive metallurgy techniques for titanium offers the prospect of lower cost Ti powder and therefore wider application of Ti. This review is largely confined to

COLD COMPACTION AND SINTERING OF TITANIUM AND ITS ALLOYS FOR NEAR-NET-SHAPE OR PREFORM FABRICATION

The conventional cold-compaction-and-sinter powder metallurgy (PM) approach offers an efficient solution to the near-net shape or preform fabrication of titanium and its alloys for cost reduction and

Sintering theory and practice

Sintering Measurement Techniques. Solid-State Sintering Fundamentals. Microstructure and Processing Relations in Solid-State Sintering. Solid-State Sintering of Mixed Powders. Liquid-Phase Sintering.