Influence of Degree of Cold-Drawing on the Mechanical Properties of Low Carbon Steel

@inproceedings{Raji2012InfluenceOD,
  title={Influence of Degree of Cold-Drawing on the Mechanical Properties of Low Carbon Steel},
  author={Nurudeen A. Raji and Oluleke O. Oluwole},
  year={2012}
}
  • Nurudeen A. Raji, Oluleke O. Oluwole
  • Published 2012
Low carbon steel metal is used for the manufacture of nails. Steel wire with <0.3% C content is cold-drawn through a series of drawing dies to reduce the diameter of the wire to the required diameter of the nails. A 0.12%w C steel wire cold drawn progressively by 20%, 25%, 40% and 50% was investigated. The influence of the degree of cold drawing on the mechanical properties of the carbon steel material were studied using the tensile test, impact test and hardness test experiments in order to… CONTINUE READING

Citations

Publications citing this paper.

References

Publications referenced by this paper.
Showing 1-10 of 38 references

Tension Test’ http://www4.ncsu.edu/~murty/MAT450/NOTES/tandhtes ts.pdf (considere construction and other factors-resilience

  • K. L. Murty
  • 2011
2 Excerpts

An Experimental Investigation of the Effect of Annealing Treatment on Strain Inhomogeneity in the Cross-Section of Drawn Copper Wires

  • A. Akpari, G. H. Hasani, M. J. Jam
  • Metal, Roznov pod Radhostem, Czech republic, EU…
  • 2010
1 Excerpt

Assessment of Locally Produced Nails

  • O. O. Isimijola
  • M.Sc Project work of University of Ibadan, Ibadan…
  • 2010
1 Excerpt

Microtructure and Textures Evolution during Annealing of a Steel Drawn Wires

  • M. Zidani, M. Messaondi, C. Derfont, T. Bandin, P. Solas, M. H. Mathon
  • Roznov pod Radhostem, Czech Republic EU.5, 2010…
  • 2010
2 Excerpts

Cold Worked High Alloy Ultra-High Strength Steels with Aged Matensite Struc- ture

  • S. J. Pawlak, H. J. Krzton
  • Journal of Achievement in Materials and…
  • 2009
1 Excerpt

Effect of Cold Rolling and Annealing on Mechanical Properties of HSLA Steel

  • J. Schindler, M. Janošec, +4 authors P. Svenanek
  • Achives of Materials Science and Engineering, Vol…
  • 2009
2 Excerpts

Effect of Cold Working and Recrystallization on the Mecristructure and Hardness of Commercial-Purity Aluminum

  • Z. Huda
  • European Journal of Scientific Research, Vol. 26…
  • 2009
1 Excerpt

Modeling Discontinuous Dynamic Recrystallization Using a Physically Based Model for Nucleation

  • D. G. Cram, H. S. Zurob, Y.J.M. Brechet, C. R. Hutchinsm
  • Acta. Materialia, Vol. 57, 2009, pp. 5218-5228…
  • 2009
1 Excerpt

The Effect of Cold Work on the Sensitization of Austenitic Stainless Steels Effect of Cold Working and Recrystallization on the Mecristructure and Hardness of Commercial - Purity Aluminum

  • M. Peter Domoinkova, M. Roman
  • European Journal of Scientific Research
  • 2009

Similar Papers

Loading similar papers…