In situ studies of evolution of microstructure with temperature in heavily deformed Ti-modified austenitic stainless steel by X-ray Diffraction technique

@article{PSChowdhury2010InSS,
  title={In situ studies of evolution of microstructure with temperature in heavily deformed Ti-modified austenitic stainless steel by X-ray Diffraction technique},
  author={P.S.Chowdhury and Narayanan Gayathri and Paramita Mukherjee and M. Bhattacharya and A. Chatterjee and A.Dutta and P. Barat},
  journal={arXiv: Materials Science},
  year={2010}
}
The mechanism of the evolution of the deformed microstructure at the earliest stage of annealing where the existence of the lowest length scale substructure paves the way to the formation of the so-called subgrains, has been studied for the first time. The study has been performed at high temperature on heavily deformed Ti-modified austenitic stainless steel using X-ray diffraction technique. Significant changes were observed in the values of the domain size, both with time and temperature. Two… Expand
4 Citations
In Situ XRD Studies of the Process Dynamics During Annealing in Cold-Rolled Copper
The dynamics of the release of stored energy during annealing along two different crystallographic planes, i.e., {111} and {220}, in deformed copper have been investigated using in situ X-rayExpand
Study of Initial Stages of Ball-Milling of Cu Powder Using X-ray Diffraction
The initial stage of size refinement of Cu powder is studied using detailed X-ray diffraction (XRD) analysis to understand the mechanism of formation of nanomaterials during the ball-milling process.Expand
Effect of tempering treatment on microstructure and fatigue life of TiC–Cr overlay, produced by plasma transferred arc alloying
In this work, TiC–Cr overlay formed by plasma transferred arc alloying was subjected to tempering treatment at 473, 673, and 873 K for 2 h, respectively. XRD was employed to investigate phaseExpand

References

SHOWING 1-10 OF 21 REFERENCES
The effect of dispersed phases upon the annealing behaviour of plastically deformed copper crystals
Abstract An electron microscopic investigation is described of the effect of high temperature annealing on deformed copper single crystals containing dispersed second phases of either cobalt orExpand
A study of the effect of titanium on the void swelling behavior of D9 steels by ion beam simulation
Abstract The void swelling behavior of D9 with 0.25Ti and D9 with 0.15Ti modified steels was studied using heavy ion irradiation. The cold worked samples were pre-implanted with a uniform heliumExpand
Subgrain growth in Al and Al-1% Mn during annealing
The subgrain growth during annealing of cold-worked Al-1% Mn and Al(4N) has been measured in the temperature intervals 300 to 400° C and 100 to 200° C respectively. For Al-1%Mn the subgrain diameterExpand
Effects of the amount of prior cold work and annealing temperature on subgrain growth in Al0.2Mg alloy
Abstract The effects of the amount of prior cold work and annealing temperature on subgrain growth in Al0.2Mg alloy (where the composition is in approximate weight per cent) have been studied duringExpand
Simultaneous structure and size-strain refinement by the Rietveld method
A new procedure for simultaneous refinement of structural and microstructural disorder parameters for polycrystalline materials is proposed. It is based on the Rietveld method combined with FourierExpand
Subgrain growth and low angle boundary mobility in aluminium crystals of orientation {110}〈001〉
Single crystals of orientation {110}〈001〉 of a high purity Al–0.05% Si single-phase aluminium alloy have been deformed in channel die plane strain compression at room temperature and 350°C. TheExpand
Discontinuous subgrain growth in deformed and annealed {110} 〈001〉 aluminium single crystals
Abstract Single-phase crystals of Al-0.05%Si of the Goss orientation {110} 〈001〉 have been deformed in channel die plane strain compression and found to be stable up to true strains of 3.0. TheExpand
Discontinuous and continuous annealing phenomena in aluminium–nickel alloy
AbstractThe annealing behaviour of an Al–6 wt-%Ni alloy containing a dispersion of second phase particles has been studied. It is shown that for a particle diameter of 0·3μm, annealing takes place byExpand
Thermal creep properties of alloy D9 stainless steel and 316 stainless steel fuel clad tubes
Uniaxial thermal creep rupture properties of 20% cold worked alloy D9 stainless steel (alloy D9 SS) fuel clad tubes for fast breeder reactors have been evaluated at 973 K in the stress range 125-250Expand
Recrystallization and Related Annealing Phenomena
Introduction the deformed state deformation textures the structure and energy of grain boundaries the mobility and migration of boundaries recovery after deformation recrystallization of single-phaseExpand
...
1
2
3
...