In Phase Compensation of Sag and Swell Voltage by using Dynamic Voltage Restorer

@article{Wasnik2019InPC,
  title={In Phase Compensation of Sag and Swell Voltage by using Dynamic Voltage Restorer},
  author={Diksha Wasnik and Radharaman Shaha},
  journal={International Journal of Scientific Research in Science, Engineering and Technology},
  year={2019}
}
  • Diksha Wasnik, Radharaman Shaha
  • Published 12 March 2019
  • Engineering
  • International Journal of Scientific Research in Science, Engineering and Technology
Today most of the industries and customers are using sensitive and sophisticated electrical equipment based on semiconductor devices, these may causes power quality disturbance. The major problems are voltage sag and swell. The sag and swell not only occur by disturbed power quality but also due to high system tapping at point of common coupling. To overcome this problem and to improve power quality the distribution companies uses various custom power devices. Among the various custom power… 

Figures from this paper

References

SHOWING 1-10 OF 23 REFERENCES
Balanced voltage sag & swell compensation by using dynamic voltage restorer
  • S. R. Reddy, P. Prasad, G. Srinivas
  • Engineering
    2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES)
  • 2016
To mitigate voltage disturbances in low voltage distribution system dynamic voltage restorer (DVR) with energy storage device is used in this paper. DVR is installed between supply and load which
Compensation of voltage sags and swells by using Dynamic Voltage Restorer (DVR)
  • Akanksha V. Ital, S. Borakhade
  • Engineering
    2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT)
  • 2016
The most important aspect for electrical engineering is power quality in recent year. Power quality problem is an event of abnormal voltage, current or frequency. Utility distribution networks
Voltage Sag and Swell compensation using DVR to enhance Power Quality
The quick developments in power electronic technology have made it possible to mitigate voltage disturbances in power grid. Among the voltage disturbances challenging the trade, the voltage sags are
Study on Compensation of Voltage Sag and Voltage Swell by Using DVR (Dynamic Voltage Restorer)
TLDR
DVR is series connected electronic device which can moderate the quality of power troubles in the scheme and re-establish the load voltage to the pre-fault rate and introduction, operation control strategies, compensation methods of DVR are given.
Implementation of discrete PWM control scheme on Dynamic Voltage Restorer for the mitigation of voltage sag /swell
A Dynamic Voltage Restorer (DVR) is one of the most common custom power devices to compensate for the voltage sag and swell. The main functions of the DVR are the injection of voltage to the power
Power Quality Improvement Using Dynamic Voltage Restorer (DVR)
Now a day power quality problem has become a major issue to deal with, in order to maintain quality supply. Modern generation greatly depends on electrical energy for improving their life style.
Dynamic voltage restorer for mitigation of voltage sag and swell
The electrical energy is a type of easily available energy. It can be efficiently converted to different forms of energies. With the increasing trend of utilization of electrical energy, Nowadays,
A modified simple algorithm for detection of voltage sags and swells in practical loads
This paper presents the implementation of a modified sliding window algorithm for the detection of sag and swell, by measuring RMS voltage updated every sample. The trigger obtained can be used in
Space vector pulse width modulation based DVR to mitigate voltage sag and swell
TLDR
The DVR based on Space Vector PWM incorporating the PLL provides voltage support to sensitive loads and is simulated by using MATLAB/SIMULINK to assimilate the amount of DC energy storage depends on the installed load.
Modeling and simulation of a distribution STATCOM (D-STATCOM) for power quality problems-voltage sag and swell based on Sinusoidal Pulse Width Modulation (SPWM)
  • R. Madhusudan, G. Ramamohan Rao
  • Engineering, Computer Science
    IEEE-International Conference On Advances In Engineering, Science And Management (ICAESM -2012)
  • 2012
This paper presents the systematic procedure of the modeling and simulation of a Distribution STATCOM (D-STATCOM) for power quality problems, voltage sag and swell based on Sinusoidal Pulse Width
...
1
2
3
...