Improving the Misalignment Tolerance of Wireless Charging System by Optimizing the Compensate Capacitor

  title={Improving the Misalignment Tolerance of Wireless Charging System by Optimizing the Compensate Capacitor},
  author={Qingwei Zhu and Yanjie Guo and Lifang Wang and Chenglin Liao and Fang Li},
  journal={IEEE Transactions on Industrial Electronics},
In this paper, we present a simple method to extend the feasible rated charging zone of a four-coil coupled wireless charging system (WCS) by optimizing the compensate capacitors of the coils. With the proposed optimizing method, the tolerant lateral misalignment of our WCS prototype has been extended to 44.3% of the coil size, achieving a 38.3% relative improvement. 
A Modular Integration Design of LCL Circuit Featuring Field Enhancement and Misalignment Tolerance for Wireless EV Charging
A modular integration design is proposed, in which an identical compensation inductor and transmitter are closely coupled, to achieve enhanced transmission capacity of high-order wireless charging circuit. Expand
Three-phase bi-directional wireless EV charging system with high tolerance to pad misalignment
Results are convincing and indicate that the proposed three-phase BD-WPT system with small pad spacing is more tolerant to wide pad misalignment in EV charging applications. Expand
Misalignment tolerance improvement in wireless power transfer using LCC compensation topology
Misalignment between the transmitter coil and the receiver coil would in some cases lead to significant power and efficiency decline in a wireless power transfer system. This paper implements the LCCExpand
A magnetically enhanced wireless power transfer system for compensation of misalignment in mobile charging platforms
Misalignment in wirelessly charged electric vehicles is unavoidable as perfect alignment of the pickup coil on the electric vehicle with respect to transmitter is quite difficult. Notably, even aExpand
A Misalignment Resilient System for Magnetically Coupled Resonant Wireless Power Transfer
Misalignments between the transmitting and receiving coils of a wireless power system can significantly reduce power transfer efficiency (PTE). In this communication, we propose a novel magneticallyExpand
Design of Loosely Coupled Transformer of Wireless Power Transfer for Higher Misalignment Tolerance of System Efficiency
The offset between the primary and secondary couplers of the Loose-Coupled Transformer (LCT) results in deviation in the efficiency of the wireless transmission system. In order to obtain higherExpand
Coil Design for High Misalignment Tolerant Inductive Power Transfer System for EV Charging
The inductive power transfer (IPT) system for electric vehicle (EV) charging has acquired more research interest in its different facets. However, the misalignment tolerance between the charging coilExpand
Digital Transmitter Coil for Wireless Power Transfer Robust Against Variation of Distance and Lateral Misalignment
It is concluded that the digital TX coil consisting of two subcoils is an effective design and that the performance is not significantly improved by adding more sub coils, and the system efficiency shows an absolute improvement of up to 7%. Expand
Design of Magnetic Coupling Mechanism with Gentle Excursion Performance for Wireless Power Transfer System
While working for wireless charging system mutual inductance coil offset will cause magnetic coupling institutions to drop, causes the output voltage and reduce the transmission power of theExpand
Compensation for Lateral Misalignment in Litz Wire Based on Multilayer Coil Technology
This study applies a multilayer coil technology that can compensate for a decrease in transfer efficiency due to a lateral misalignment in a practical 100 kHz-band wireless power transfer system andExpand


Compensate Capacitor Optimization for Kilowatt-Level Magnetically Resonant Wireless Charging System
A design method featuring compensate capacitor optimizing for better design of practical kilowatt-level WCS is presented and considering peculiar constraints and requirements of EV-oriented WCS, detailed optimizing procedure and adjustment criterion are presented. Expand
Electronic Tuning of Misaligned Coils in Wireless Power Transfer Systems
The misalignment and displacement of inductively coupled coils in a wireless power transfer system (WPT) can degrade the power efficiency and limit the amount of power that can be transferred. CoilExpand
High-Misalignment Tolerant Compensation Topology For ICPT Systems
It is shown that it is possible to transfer rated power even with high misalignment if a suitable compensation topology is selected, and a series-parallel-series (SPS) topologies is proposed, showing a suitable behavior for both the load and the power source. Expand
Misalignment tolerable coil structure for biomedical applications with wireless power transfer
A novel receiver configuration with high misalignment tolerance is presented, composed of two receiver coils placed orthogonally, so as to reduce the variation of mutual inductance between transmitting and receiving coils under misal alignment conditions. Expand
A novel resonator for robust lateral-misalignment of magnetic resonance wireless power link
A novel resonator structure for lateral-misalignment of wireless power transfer is presented. The proposed resonator is composed of a concentrated coil and several small loop coils. The uniformExpand
Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems
Leakage magnetic fields have been investigated and show that circular and DD couplers operating under similar power transfer conditions produce similar levels. Expand
This publication replaces the low-frequency part of the 1998 guidelines and some guidance in this document is extended to 10 MHz to cover the nervous system effects in this frequency range. Expand