• Corpus ID: 33953132

Improving Concrete Properties with Fibers Addition C

@inproceedings{Mello2014ImprovingCP,
  title={Improving Concrete Properties with Fibers Addition C},
  author={E. Mello and C. Ribellato and Eltayeb Mohamedelhassan},
  year={2014}
}

• E. Mello, C. Ribellato, E. Mohamedelhassan
• Published 2014
• Materials Science, Engineering

This study investigated the improvement in concrete properties with addition of cellulose, steel, carbon and PET fibers. Each fiber was added at four percentages to the fresh concrete, which was moist-cured for 28-days and then tested for compressive, flexural and tensile strengths. Changes in strength and increases in cost were analyzed. Results showed that addition of cellulose caused a decrease between 9.8% and 16.4% in compressive strength. This range may be acceptable as cellulose fibers can significantly increase the concrete resistance to fire, and freezing and thawing cycles. Addition of steel fibers to concrete increased the compressive strength by up to 20%. Increases 121.5% and 80.7% were reported in tensile and flexural strengths respectively. Carbon fibers increased flexural and tensile strengths by up to 11% and 45%, respectively. Concrete strength properties decreased after the addition of PET fibers. Results showed that improvement in strength after addition of steel and carbon fibers may justify the extra cost of fibers. 1 Keywords—Concrete, compressive strength, fibers, flexural strength, tensile strength.