Improved oxidation resistance of high emissivity coatings on fibrous ceramic for reusable space systems

  title={Improved oxidation resistance of high emissivity coatings on fibrous ceramic for reusable space systems},
  author={G. Shao and Yucao Lu and D. Hanaor and Sheng Cui and J. Jiao and Xiaodong Shen},
  journal={Corrosion Science},
Abstract To develop high emissivity coatings on fibrous ceramic substrates with improved thermal resistance for reusable space systems, WSi2–MoSi2–Si–SiB6-borosilicate glass coatings were prepared on fibrous ZrO2 by slurry dipping and subsequent high temperature rapid sintering. A coating with 20 wt% WSi2 and 50 wt% MoSi2 presents optimal thermal stability with only 10.06 mg/cm2 mass loss and 4.0% emissivity decrease in the wavelength regime 1.27–1.73 μm after 50 h oxidation at 1773 K. The… Expand

Figures and Tables from this paper

A WSi2-HfB2-SiC coating for ultralong-time anti-oxidation at 1973 K
Abstract In order to improve the oxidation resistance of C/C composites at 1973 K, WSi2-HfB2-SiC coating was prepared on the surface of SiC coated C/C composites. Experiment results show thatExpand
Microstructure evolution and bonding mechanisms of silica sol bonded coating at elevated temperatures
Abstract High emissivity coating plays a critical role in thermal protective system, which can radiate a large amount of aero-convective heat. Silica sol bonded MoSi2-SiC-Al2O3 (S-MSA) coating wasExpand
Double-layer gradient MoSi2-borosilicate glass coating prepared by in-situ reaction method with high contact damage resistance and interface bonding strength
Abstract High emissivity coating is an important part of spacecraft thermal protection system. MoSi2-borosilicate glass coatings prepared by the in-situ reaction method showed excellent thermalExpand
Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs – a review
ABSTRACT Composites are, in general, a rapidly evolving and growing technical field with a very wide range of applications across the aerospace, defence, energy, medical and transport sectors as aExpand
Influence of Fe2O3 on the structure and near-infrared emissivity of aluminosilicate glass coatings
The present paper reports on the development of a vitreous material with high near-infrared (NIR) emissivity. Silica-based glasses (SiO2, Na2O, Al2O3, K2O) with different Fe2O3 (hematite) contentsExpand
Influence of doping Mg2+ or Ti4+ captions on the microstructures, thermal radiation and thermal cycling behavior of plasma-sprayed Gd2Zr2O7 coatings
Abstract Gadolinium zirconate (Gd2Zr2O7) coatings doped by the transition metal Ti and the alkaline earth metal Mg were expected to have improved thermal radiation performance, which could beExpand
Improving the oxidation resistance of WSi2 by boron doping: A DFT study
Abstract To explore the effect of boron on the high-temperature oxidation resistance of WSi2 in atomic scale, the stability of WSi2 surfaces were firstly investigated by the first-principlesExpand
Modified two-temperature calibration method for emissivity measurements at high temperatures
Abstract In this study, an experimental apparatus for normal spectral emissivity measurements in the temperature range from 673 to 1473 K and spectral range from 2 to 25 μm was constructed. ToExpand


Microstructure and oxidation resistance of a YSZ modified silicide coating for Ta-W alloy at 1800 °C
Abstract To develop an ultra-high temperature resistant coating for a reusable thermal protection system, a YSZ-modified Si-Mo coatings were prepared on Ta-10 W alloy by slurry reaction sinteringExpand
Design, formation, and property of high emissivity WSi2-Si-glass hybrid coating on fibrous ZrO2 ceramic for reusable thermal protection system
Abstract The objective of this research was to develop a high emissivity coating on the low thermal conductive insulation for reusable thermal protection system. The design principles including highExpand
Evolution of microstructure and radiative property of metal silicide–glass hybrid coating for fibrous ZrO2 ceramic during high temperature oxidizing atmosphere
Abstract To develop a high emissivity, high-temperature-resistant coating for a reusable thermal protection system, a metal silicide–glass hybrid coating was prepared on fibrous ZrO 2 ceramic byExpand
Advanced Porous Coating for Low‐Density Ceramic Insulation Materials
The need for improved coatings on low-density reusable surface insulation (RSI) materials used on the space shuttle has stimulated research into developing tougher coatings. The processing of a newExpand
High emissivity MoSi2–ZrO2–borosilicate glass multiphase coating with SiB6 addition for fibrous ZrO2 ceramic
Abstract To develop a high emissivity coating on the low thermal conductivity ZrO 2 ceramic insulation for reusable thermal protective system, the MoSi 2 –ZrO 2 –borosilicate glass multiphaseExpand
Formation and oxidation resistance of a new YSZ modified silicide coating on Mo-based alloy
Abstract A new YSZ (yttria stabilized zirconia) modified silicide coating was prepared on Mo-based alloy through a two-step process, including spraying of Si-Mo-YSZ slurry followed by reactionExpand
Cyclic ablation of high-Emissivity Sm-Doped ZrB 2 /SiC coatings on alumina substrates
Abstract Samarium-doped ZrB2/SiC (ZBS) coatings possess properties of high emissivity and excellent ablation performance suitable for hypersonic applications. Of interest in the current study is howExpand
Effect of high temperature oxidation on the radiative properties of HfC-based ceramics
Abstract Hafnium carbide (HfC) is a promising material for high-temperature heat exchangers due to its high melting point (4170 K). Nevertheless, its fast oxidation into fragile hafnia prevents itExpand
High emissivity MoSi2–TaSi2–borosilicate glass porous coating for fibrous ZrO2 ceramic by a rapid sintering method
Abstract A MoSi 2 -TaSi 2 -borosilicate glass porous coating was designed and prepared on fibrous ZrO 2 ceramic with slurry dipping and subsequent rapid sintering method. The microstructure,Expand
MoSi2-borosilicate glass coating on fibrous ceramics prepared by in-situ reaction method for infrared radiation
Abstract MoSi2-borosilicate glass coating with MoSi2 as emittance agent was prepared on mullite fibrous ceramics for enhanced superficial infrared radiation via an in-situ reaction method. The phaseExpand