Implementation of Digital Signal Processor to Control Three-Phase Voltage-Source Inverter

@inproceedings{Chaudhari2011ImplementationOD,
  title={Implementation of Digital Signal Processor to Control Three-Phase Voltage-Source Inverter},
  author={Madhuri A. Chaudhari},
  year={2011}
}
This paper explores the advantages and implementation of Digital Signal Processing (DSP) TMS 320F2812 to generate gate pulses. The main features of this DSP are elaborated. The technique to obtain gate pulses in different pulse width modulation methods in order to control three-phase voltage source inverter is explained systematically. The steps needed to develop the program are highlighted in detail to control frequency and the duty cycle of PWM waveform. Further Fabrication of gate driver… 

Figures and Tables from this paper

DSP Based Real Time Implementation of ac-DC-ac Converter Using SPWM Technique

TLDR
The open loop system model of ac-dc-ac converter is designed, simulated and realized in SIMULINK, and the problem of controlling the induction motors driven through ac-DC-ac converters is considered.

Development of a research platform for power electronic converter modeling in real time F28335 digital simulation applications using eZDSP

This paper presents the research platform for real time digital simulation (RTS) applications which replaces the requirement of full scale or partial scale validation of physical systems. To

Comparative analysis of modular multilevel converter with different modulation technique for control of induction motor drive

Modular multilevel converter (MMC) is an enhanced multilevel converter topology. It is widely used in research nowadays for its superior performance in high-voltage high-power applications.

Operation of modular multilevel converter drive with reduced submodules and DC supply

  • P. KapoorM. Renge
  • Engineering
    2017 International Conference on Energy, Communication, Data Analytics and Soft Computing (ICECDS)
  • 2017
TLDR
This paper focuses on selection of suitable carrier based PWM technique for MMC used to drive Induction Motor (IM), and reduces the number of switches and dc supply for M MC topology used for operation of electric motor drive.

References

SHOWING 1-7 OF 7 REFERENCES

A Single-Phase High-Power-Factor Neutral-pointer Clamped Multilevel Rectifier

A single-phase rectifier based on neutral-clamped converter (NPC) is proposed to achieve high power factor, lower current distortion and low voltage stress of power semiconductors. The principle of

Three-Phase Rectifier With Active Current Injection and High Efficiency

TLDR
An active current injection network for a three-phase rectifier using three bidirectional switches operating at low frequency and a half-bridge inverter operating at high frequency offers high efficiency and the total harmonic distortion is reduced.

One cycle controlled bi-directional Ac to Dc converter with constant power factor

Grid connected unity power factor converters based on one cycle control (OCC) do not require the service of PLL or any other synchronization circuits for interfacing with the utility. As a result,

One-Cycle-Controlled Bidirectional AC-to-DC Converter With Constant Power Factor

TLDR
Having understood the cause for poor power factor operation, a modified-OCC-based converter is proposed that has high power factor while supplying high power loads and is carried out on a 3-kW laboratory prototype.

Power Electronics: Converters, Applications and Design

Partial table of contents: Overview of Power Semiconductor Switches. Computer Simulation of Power Electronic Converters and Systems. GENERIC POWER ELECTRONIC CIRCUITS. dc--dc Switch-Mode Converters.

Modern Power Electronics

Adjustable Speed Drives Self-Study Course by Wayne L. Stebbins, Published by IEEE, Piscataway, NJ. A high demand for adjustable speed drive (ASD) systems in utility, industrial, and commercial

DSP TMS320F2812 Technical reference manual