• Corpus ID: 29060763

Impact of Silicon Content on Mechanical Properties of Aluminum Alloys

@inproceedings{Kalhapure2017ImpactOS,
  title={Impact of Silicon Content on Mechanical Properties of Aluminum Alloys},
  author={Milind G Kalhapure and Pradeep M Dighe},
  year={2017}
}
Mechanical testing plays an important role in evaluating fundamental properties of engineering materials as well as in developing new materials and in controlling the quality of materials for use in design and construction. If a material is to be used as part of an engineering structure that will be subjected to a load, it is important to know that the material is strong enough and rigid enough to withstand the loads that it will experience in service. As a result engineers have developed a… 

Figures from this paper

Investigation of micro-structure and mechanical properties of three steel alloys

The significant demands of steel in industrial applications and automotive and building industries are increasing. Thus, there is a need for the improvement of its mechanical properties by adding

Improvement the mechanical and tribological properties of high temperature Al-Si-Ni alloys

Mechanical testing plays an important role in evaluating the fundamental properties of engineering materials as well as, in developing new materials. Microstructure as light optical microscope (LOM)

Effect of Silicon on Microstructure and Mechanical Properties of Al-Si Piston Alloys

Al-Si alloys are in demand for several structural devices of their high strength to weight ratio. The enhancement in properties is further observed when suitably alloyed with the different elements.

Dependence of mechanical properties on volume of Si and Cu in secondary Al-Si-Cu cast alloy

Mechanical properties testing plays an important role in evaluating fundamental behaviour of engineering materials as well as in developing new materials and in controlling the quality of materials

Use of artificial neural network for prediction of mechanical properties of Al-Si alloys synthesized by stir casting

Mechanical testing plays an important role in evaluating the fundamental properties of engineering materials as well as, in developing new materials. The use of conventional mathematical models in

Effect of Silicon Content on Mechanical Properties and Progressive Collapse Behavior of Closed-cell Aluminum Foams

Aluminum foams with different silicon content have been produced by the Alporas method, where calcium and calcium carbonate are used as a thickening and foam agent, respectively. Performing

Effects of Alloying on Aluminium-Silicon Alloys – A Review

Some of the factors in which the mechanical, physical and chemical properties of aluminium alloys hinge on are composition and microstructure. The inclusion of specific alloying elements to aluminium

On the Microstructure, Hardness and Impact Toughness of 356 and 413 Alloys

The present study was performed on 356 and 413 alloys containing various amounts of hydrogen (H2), titanium diboride (TiB2) and strontium (Sr). The results show that the eutectic silicon particles in

INFLUENCE OF SOLIDIFICATION RATE ON ELECTRICAL AND MECHANICAL PROPERTIES OF EUTECTIC AND HYPEREUTECTIC AL-SI ALLOYS

ABSTRACTEutectic Al–13 wt. % Si and hypereutectic Al-16 wt. % Si were prepared by usingpermanent mould casting technique. Effect of the cooling technique on the castmicrostructure, mechanical

Applying ANOVA and DOE to study the effect of manganese on the hardness and wear rate of artificially aged Al-4.5wt%Cu alloys

Abstract The addition of manganese may constitute an important means for imparting the mechanical properties of Al-4.5wt%Cu alloys that have been artificially aged. The literature, however, comprises

References

SHOWING 1-10 OF 13 REFERENCES

Influence of aluminium content on the physical, mechanical and sliding wear properties of zinc-based alloys

Attention has been focussed on the influence of Al content on the physical, mechanical and sliding wear properties of Zn-based alloys. Aspects studied include microstructure, density, electrical

Synthesis and Study on Effect of Parameters on Dry Sliding Wear Characteristics of AL-SI Alloys

The effect of parameters on dry sliding wear characteristics of Al-Si alloys was studied. Aluminium-silicon alloys containing 7%, 12% and 14% weight of silicon were synthesized using casting method.

Production and Structure of Rapidly Solidified Al-Si Alloys

Al-Si alloys with compositions 8, 12, 16wt% Si were manufactured by chill casting and melt-spinning (MS) methods. The resulting ribbon samples have been characterized by optical and scanning electron

Review on the Influence of Alloying elements on the Microstructure and Mechanical Properties of Aluminum Alloys

  • International Journal of Scientific and Research Publication,
  • 2012

Paper presented at the 84 th Casting Congress and Exposition of the American Foundry men's Society, St. Louis, Missouri

  • p.1 also published I the Transactions of the AFS,
  • 1980