INVESTIGATION OF IMPACT OF CROSSLINKING AGENTS ON CHARACTERISTICS OF SPATIAL NET AND PROPERTIES OF STYRENE-ACRYLIC POLYMER FILMS

@article{Slepchuk2018INVESTIGATIONOI,
  title={INVESTIGATION OF IMPACT OF CROSSLINKING AGENTS ON CHARACTERISTICS OF SPATIAL NET AND PROPERTIES OF STYRENE-ACRYLIC POLYMER FILMS},
  author={Inna Slepchuk and Olga Semeshko and Tatiana Asaulyuk and Yuliya G. Saribekova},
  journal={IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA},
  year={2018}
}
The influence of crosslinking agents on the characteristics and properties of films from aqueous dispersions of styrene-acrylic polymers Lacritex 309, 430 and 640 was studied in order to obtain coatings on textile materials. Mono-, di- and triglycidyl esters are chosen as crosslinking agents. The choice of aqueous dispersions of polymers and crosslinkers is due to strict environmental requirements for textile products. By determining the amount of aceton-insoluble fractions of the formed… 

Figures and Tables from this paper

Studying the influence of uv adsorbers on optical characteristics of light-protective polymer films for textile materials

The use of UV adsorbers included in composition of a polymer film is a promising way of color protecting against effects of light since application of the polymer to the textile material surface is a

Hydrophobization of up-conversion luminescent films based on nanocellulose/MF2:Ho particles (M = Sr, Ca) by acrylic resin

A. A. Fedorov Prokhorov General Physics Institute of the Russian Academy of Sciences, Vavilov str.

INVESTIGATION OF PHYSICOCHEMICAL PROPERTIES OF STYRENE-ACRYLIC AND URETHANE POLYMERS USED IN FINISHING OF TEXTILE MATERIALS

Представлены результаты исследования физико-химических свойств стирол-акриловых и уретановых полимерных пленок, а также полимерных композиций на их основе с добавлением сшивающих агентов. Для

References

SHOWING 1-10 OF 32 REFERENCES

Effect of carboxyl on vulcanization and mechanical properties of carboxylated acrylic rubber prepared by 60Co-γ-ray-induced polymerization

Acrylic acid carboxylated acrylic rubber (ACM) and itaconic acid carboxylated acrylic rubber were prepared by 60Co-γ-ray-induced emulsion copolymerization. The polymers were characterized using FTIR

Synthesis and properties of styrene–butylacrylate emulsion copolymers modified by silane compounds

Styrene (St)/butyl acrylate (BA) copolymers were prepared by adding triethoxyvinylsilane (TEVS), trimethoxyvinylsilane (TMVS), and triphenylvinylsilane (TPVS), each one through emulsion

Proton exchange membranes by grafting of styrene–acrylic acid onto FEP by preirradiation technique. I. Effect of synthesis conditions

Grafting of styrene–acrylic acid (sty–AA) polymer onto fluorinated ethylene propylene copolymer (FEP) was carried out by preirradiation of FEP with γ-rays. Effect of reaction conditions on the degree

Organic Coatings: Science and Technology

This volume covers raw materials for coatings (e.g. resins, solvents, pigments) and compares their relative merits and limitations. It deals with the chemistry of polymers, polymerization reactions,

RESEARCH OF INFLUENCE OF CROSS-LINKING AGENTS ON CHARACTERISTICS OF SPATIAL GRID AND PROPERTIES OF URETHANE POLYMER

Results of study of influence of amount of functional groups of glycidyl ethers on characteristics of the spatial grid of crosslinked polyurethane polymer are presented. Parameters of a

Study of crosslinking acid copolymer/DGEBA systems by FTIR

A study of crosslinking of diglycidylether of bisphenol A (DGEBA) by four copolymers of poly(acrylic acid-co-styrene) having different acid group percentages, in the range 7.6–76.6%, was done by

Preparation of epoxy-acrylic latex based on bisphenol F epoxy resin

ABSTRACT Bisphenol F based epoxy-acrylic latex with different amount of epoxy resin was successfully prepared by semi-continuous seeded emulsion polymerization. The resulting composite latexes had a