IJSRD-International Journal for Scientific Research & Development| Vol. 3, Issue 04, 2015 | ISSN (online): 2321-0613
@inproceedings{Rega2015IJSRDInternationalJF, title={IJSRD-International Journal for Scientific Research \& Development| Vol. 3, Issue 04, 2015 | ISSN (online): 2321-0613}, author={M. Padma Rega and S. Merlin Joys Mary and Dr. K. Punitha}, year={2015} }
In Recent trends integration of Distributed Generation (DG) units in the distribution system is one of the major concerns for electrical power system. The voltage control for small DG units in the grid is kept in the standard limit. There is lack in reactive power support that brings the problem of slow recovery and it leads to the usage of expensive Flexible AC Transmission System (FACTS) devices such as static synchronous compensator (STATCOM). STATCOM has been placed at the bus which…
No Paper Link Available
References
SHOWING 1-10 OF 20 REFERENCES
VAR Planning With Tuning of STATCOM in a DG Integrated Industrial System
- EngineeringIEEE Transactions on Power Delivery
- 2013
Wide-scale penetration of distributed-generation (DG) units into a weakly meshed distribution system is one of the major concerns for power system engineers in recent years. As grid standards limit…
Fault Condition Analysis in a Grid Connected PV Energy System
- Engineering
One of the most popular issues in the future power generation is the renewable energy and the development of Micro-grid (MG) energy system. Different types of renewable energies are harnessed and…
A Status review of Incorporation of FACTS Controllers in Multi-Machine Power Systems for Enhancement of Damping of Power System and Voltage Stability
- Engineering
- 2010
This paper presents exhaustive review of various methods/techniques for incorporation of differential algebraic equations (DAE) model of FACTS controllers in multi-machine power system environments…
Maintaining Voltage Stability in Power System using FACTS Devices
- Engineering
- 2013
Modern power systems are prone to widespread failures. With the increase in power demand, operation and planning of large interconnected power system are becoming more and more complex, so power…
Overview of Control and Grid Synchronization for Distributed Power Generation Systems
- EngineeringIEEE Transactions on Industrial Electronics
- 2006
An overview of the structures for the DPGS based on fuel cell, photovoltaic, and wind turbines is given and the possibility of compensation for low-order harmonics is discussed.
StatCom control at wind farms with fixed-speed induction generators under asymmetrical grid faults
- EngineeringIEEE Transactions on Industrial Electronics
- 2013
Investigations on an FSIG-based wind farm in combination with a StatCom under unbalanced grid voltage fault are carried out by means of theory, simulations, and measurements, and the results clarify the effect of the positive- and the negative-sequence voltage compensation by aStatCom on the operation of theFSIG- based wind farm.
Unbalanced Grid Fault Ride-Through Control for a Wind Turbine Inverter
- Engineering2007 IEEE Industry Applications Annual Meeting
- 2007
Large variable speed wind turbines with fully rated, direct-in-line converters are increasingly used as silicon cost continues to decline. While grid codes require wind turbines to ride-through grid…
OPTIMAL LOCATION OF STATCOM USING PSO IN IEEE 30 BUS SYSTEM
- Economics
- 2013
In this paper we find the optimal location of STATCOM in the IEEE 30 bus to minimize the value of voltage deviation. For finding the optimal location of STATCOM we use the evolutionary computational…
Flexible control of small wind turbines with grid failure detection operating in stand-alone and grid-connected mode
- EngineeringIEEE Transactions on Power Electronics
- 2004
This paper presents the development and test of a flexible control strategy for an 11-kW wind turbine with a back-to-back power converter capable of working in both stand-alone and grid-connection…
Application of Dynamic Programming Method for Reactive Power Planning
- Computer Science
- 2003
An appropriate cycling time for reactive power planning in whole year is addressed and results are presented for the application of the proposed methodology to Iran’s South-East network, which improves voltage profile, and reduces losses.