III-Nitride full-scale high-resolution microdisplays

@article{Day2011IIINitrideFH,
  title={III-Nitride full-scale high-resolution microdisplays},
  author={Jacob Day and Jing Li and Donald Yu-Chun Lie and Charles Bradford and Jingyu Lin and Hongxing Jiang},
  journal={Applied Physics Letters},
  year={2011},
  volume={99},
  pages={031116}
}
We report the realization and properties of a high-resolution solid-state self-emissive microdisplay based on III-nitride semiconductor micro-size light emitting diodes (µLEDs) capable of delivering video graphics images. The luminance level of III-nitride microdisplays is several orders of magnitude higher than those of liquid crystal and organic-LED displays. The pixel emission intensity was almost constant over an operational temperature range from 100 to −100 °C. The outstanding performance… 

Figures and Tables from this paper

Nitride MicroLEDs and Beyond - A Decade Progress Review
Since their inception [1,2], micro-size light emitting diode (µLED) arrays based on III-nitride semiconductors have emerged as a promising technology for a range of applications, including
Nitride micro-LEDs and beyond--a decade progress review.
TLDR
An overview on a decade progresses on realizing III-nitride µLED based high voltage single-chip AC/DC-LEDs without power converters to address the key compatibility issue between LEDs and AC power grid infrastructure and high-resolution solid-state self-emissive microdisplays operating in an active driving scheme.
A large-scale, ultrahigh-resolution nanoemitter ordered array with PL brightness enhanced by PEALD-grown AlN coating.
TLDR
A feasible way for realizing an advanced nanoemitter array with both high brightness and ultrahigh resolution for future smart displays, high-resolution imaging, big-data optical information systems and so on is demonstrated.
GaN‐based emissive microdisplays: A very promising technology for compact, ultra‐high brightness display systems
TLDR
Using the hybridization approach, two types of 10-μm pixel pitch GaN microdisplay prototypes were developed: directly driven, 300 ×-252 pixels and active-matrix, 873 × 500 pixels.
Explorer CMOS-controlled color-tunable smart display
We demonstrate a color-tunable smart display system based on a micropixelated light-emitting diode ð LEDÞ array made from one InGaN epitaxial structure with high (0.4) indium mole fraction. When
A Simple Approach to Achieving Ultrasmall III-Nitride Microlight-Emitting Diodes with Red Emission
The microdisplays for augmented reality and virtual reality require ultrasmall micro light-emitting-diodes (μLEDs) with a dimension of ≤5 μm. Furthermore, the microdisplays also need three kinds of
High-resolution active-matrix 10-μm pixel-pitch GaN LED microdisplays for augmented reality applications
We report high resolution (873 x 500), active-matrix, GaN-based LED microdisplays with a pixel pitch of 10 μm. They exhibit the highest resolution for the smallest pixel pitch ever reported for GaN
75-1: Invited Paper: GaN-based Emissive Microdisplays: A Very Promising Technology for Compact, Ultra-high Brightness Display Systems
High-brightness GaN-based emissive microdisplays can be fabricated with different approaches. Using the hybridization approach, we have developed 2 types of GaN microdisplay prototypes with a pixel
Three-dimensional monolithic micro-LED display driven by atomically thin transistor matrix
TLDR
Low-temperature ultraclean integration of large-area MoS2 thin-film transistors with nitride micro-LEDs through a back end of line process enables the demonstration of displays with high resolution and uniformity.
Transfer-printed, tandem microscale light-emitting diodes for full-color displays
TLDR
A tandem device scheme based on stacked red, green, and blue (RGB) micro-LEDs for the realization of full-color lighting and displays is introduced and a thin-film dielectric-based optical filter serves as a wavelength selective interface for performance enhancement.
...
...

References

SHOWING 1-10 OF 30 REFERENCES
III-nitride blue microdisplays
Prototype blue microdisplays have been fabricated from InGaN/GaN quantum wells. The device has a dimension of 0.5×0.5 mm2 and consists of 10×10 pixels 12 μm in diameter. Emission properties such as
Size dependence of III-nitride microdisk light-emitting diode characteristics
Individual microdisk blue-light-emitting diodes (μ-LEDs) of varying diameters from 5 to 20 μm have been fabricated from InGaN/GaN quantum wells. Size effects on the μ-LED characteristics, including
III-Nitride Quantum Devices—Microphotonics
Photonic devices based on III-nitrides offer benefits such as UV/blue emission, large band offsets of InN/GaN/AlN heterostructures allowing novel quantum well (QW) device design, and inherently
Microdisplays based upon organic light-emitting diodes
TLDR
The requirements for microdisplays are reviewed, and the case is made that organic light-emitting diodes (OLEDs) are the best candidate transducer technology for meeting these requirements.
GaN microdisk light emitting diodes
Microdisk light-emitting diodes (μ-LEDs) with diameter of about 12 μm have been fabricated from InGaN/GaN quantum wells. Photolithographic patterning and inductively coupled plasma dry etching have
Micro-LED arrays: a tool for two-dimensional neuron stimulation
TLDR
A GaN based micro-light emitting diode (LED) array that can open the way to multi- site photostimulation of neuron cells and a complete system that combines the micro-LED array with multi-site electrophysiological recording based on microelectrode array technology and/or fluorescence imaging is presented.
Multi-site optical excitation using ChR2 and micro-LED array.
TLDR
A simple and powerful solution based on an array of high-power micro light-emitting diodes (micro-LEDs) that can generate arbitrary optical excitation patterns on a neuronal sample with micrometre and millisecond resolution is presented.
Improvement of Luminous Efficiency in White Light Emitting Diodes by Reducing a Forward-bias Voltage
We fabricated three types of high luminous efficiency white light emitting diodes (LEDs). The first is the white LED, which had a high luminous efficiency (ηL) of 161 lm/W with the high luminous flux
GAN : PROCESSING, DEFECTS, AND DEVICES
The role of extended and point defects, and key impurities such as C, O, and H, on the electrical and optical properties of GaN is reviewed. Recent progress in the development of high reliability
Optobionic vision--a new genetically enhanced light on retinal prosthesis.
TLDR
It is shown that typically 100 mW cm−2 in instantaneous light intensity on the neuron in order to stimulate action potentials is needed, and how this can be reduced down to safe levels inorder to negate thermal and photochromic damage to the eye.
...
...