Hybrid EMT-TS Simulation Strategies to Study High Bandwidth MMC-Based HVdc Systems

@article{Liu2020HybridES,
  title={Hybrid EMT-TS Simulation Strategies to Study High Bandwidth MMC-Based HVdc Systems},
  author={Yuan Liu and Marcelo A. Elizondo and Suman Debnath and Jingfan Sun and Ahmad Tbaileh and Yuri V. Makarov and Qiuhua Huang and Mallikarjuna R. Vallem and Harold Kirkham and Nader A. Samaan},
  journal={2020 IEEE Power \& Energy Society General Meeting (PESGM)},
  year={2020},
  pages={1-5}
}
Modular multilevel converters (MMCs) are widely used in the design of modern high-voltage direct current (HVdc) transmission system. High-fidelity dynamic models of MMCs-based HVdc system require small simulation time step and can be accurately modeled in electro-magnetic transient (EMT) simulation programs. The EMT program exhibits slow simulation speed and limitation on the size of the model and brings certain challenges to test the high-fidelity HVdc model in system-level simulations. This… 

Figures and Tables from this paper

References

SHOWING 1-10 OF 18 REFERENCES
MMC-HVDC: Simulation and control system
TLDR
An ultra-fast single- or multi-CPU simulation algorithm to simulate the MMC-HVDC system based on state-space models and using hybrid discretization algorithm with a relaxation technique that reduces the imposed computational burden is presented.
Hybrid simulation platform for VSC-HVDC-assisted large-scale system restoration studies
TLDR
A hybrid simulation framework for power system restoration is proposed, which can represent a significant portion of the model in a phasor framework and co-simulate that with a detailed model of a smaller portion containing VSC-HVDC.
Parallel processing and hybrid simulation for HVDC/VSC PSCAD studies
TLDR
This paper introduces two new simulation developments called Electro-Magnetic Transient (EMT) Parallel Processing and Hybrid Simulation, which create a dynamic interface between industry leading EMT and Transient Stability Analysis programs, allowing both types of programs to be run in the same dynamic simulation.
Fidelity Requirements with Fast Transients from VSC-HVdc
  • S. Debnath, Jingfan Sun
  • Physics
    IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society
  • 2018
TLDR
The fidelity of power electronics and connected grid components like transmission lines are identified based on defined use-cases to understand the stability and impact of the fast control afforded by VSC-HVdc systems.
HVDC macrogrid modeling for power-flow and transient stability studies in north american continental-level interconnections
TLDR
The model provides insight on feasibility and initial steady-state and stability tests of the HVDC macrogrid and its interactions with the existing electricity infrastructure, opening the door to analysis of the technical value of such a macrogrid.
Stability analysis of VSC MTDC grids connected to multimachine ac systems
Summary form only given. Interaction between multimachine ac systems and a multiterminal dc (MTDC) grid and the impact on the overall stability of the combined ac-MTDC system is studied in this
Numerical-Stiffness-Based Simulation of Mixed Transmission Systems
TLDR
An advanced simulation algorithm that considers separation of differential algebraic equations (DAEs) on the basis of numerical stiffness and applies hybrid discretization algorithms to simulate the DAEs, which represent the nonlinear nonautonomous switched system dynamics of power systems.
Modeling of Rectifier-Controlled Induction Motor Drive Load in Transient Stability Simulation Tools
TLDR
A novel comprehensive model of a rectifier-controlled induction motor drive for use in positive-sequence transient stability simulation (PSTSS) programs is proposed and validated by comparing the performance with the electromagnetic transient point-on-wave drive model.
Performance-Based Linearization Approach for Modeling Induction Motor Drive Loads in Dynamic Simulation
This paper describes a technique to model a vector-controlled induction motor drive in large-scale phasor-level dynamic simulation programs. The performance-based load model is implemented by
An Interim Dynamic Induction Motor Model for Stability Studies in the WSCC
An interim composite load model containing a static part and a dynamic part has been implemented in the WSCC. The static part of the load model is about 80% of the total load and comprises of
...
...