High strain gradient measurements using modified automated grid technique

  title={High strain gradient measurements using modified automated grid technique},
  author={Xiaofen Li and Zhongwei Zhang and Lijun Qin and Feng Xiang and Zhi-hai Feng and Linghui He and Yang Wang and Hong Miao and Xinglong Gong},
  journal={Optics and Lasers in Engineering},

Figures and Tables from this paper

The Grid Method for In‐plane Displacement and Strain Measurement: A Review and Analysis
The grid method is a technique suitable for the measurement of in‐plane displacement and strain components on specimens undergoing a small deformation. It relies on a regular marking of the surfaces
Evaluation of Methodologies for Compensation of Out of Plane Motions in a 2D Digital Image Correlation Setup
In 2D digital image correlation, out of plane motions are an important experimental factor to consider. Because a 2D setup does not provide any depth information, movements towards the camera (out of
Large-strain Soft Sensors Using Elastomers Blended with Exfoliated/Fragmented Graphite Particles
An elastic polymer (e.g., PDMS) blended with EFG particles is a promising conductive composite for fabricating soft sensors that can detect an object's deformation up to or more than 50%. Here, we
Parameter study of microwave assisted exfoliation of graphite and its application to large deformation strain sensors
Exfoliated graphite (EG), when blended into elastomer, is a promising material for the fabrication of large deformation strain sensors that can detect large deformation up to or more than 50%. Much,


A Procedure for Accurate One-Dimensional Strain Measurement Using the Grid Method
This paper deals with the accurate calculation of strain using the grid method. The strain field is first directly deduced from the fringe pattern without calculating the displacement field. This
Displacement and strain measurement with automated grid methods
An image-processing-based automated grid method is investigated to determine the method's displacement and strain accuracy limits, and how these limits are influenced by the choice of
Measuring Mechanical Properties of the 3D Carbon/Carbon Composite Using Automated Grid Method
A precise measurement, which was based on the automated grid method, was developed to analyze the mechanical properties of a three-dimensional reinforced carbon/carbon composite under tensile and
The artificial periodic lattice phase analysis method applied to deformation evaluation of TiNi shape memory alloy in micro scale
The basic principle of the artificial periodic lattice phase analysis method on the basis of an artificial periodic lattice was thoroughly introduced in this investigation. The improved technique is
The digital geometric phase technique applied to the deformation evaluation of MEMS devices
Quantitative evaluation of the structure deformation of microfabricated electromechanical systems is of importance for the design and functional control of microsystems. In this investigation, a
System response to automated grid methods
A start-to-finish analysis of grid point tracking with image acquisition hardware and pattern recognition software shows that the intensity profile of the individual grid spots has a significant impact on the maximum allowable grid frequency, camera field of view, and the overall aceuracy of automated grid methods.
Deformation analysis of MEMS structures by modified digital moiré methods