High performance anodes with tailored catalytic properties for La5.6WO11.4−δ based proton conducting fuel cells

@article{Balaguer2013HighPA,
  title={High performance anodes with tailored catalytic properties for La5.6WO11.4−δ based proton conducting fuel cells},
  author={M. Balaguer and C. Solis and F. Bozza and N. Bonanos and J. Serra},
  journal={Journal of Materials Chemistry},
  year={2013},
  volume={1},
  pages={3004-3007}
}
  • M. Balaguer, C. Solis, +2 authors J. Serra
  • Published 2013
  • Materials Science
  • Journal of Materials Chemistry
    • A new generation of anodes for PC-SOFCs based on catalytically promoted La0.75Ce0.1Sr0.15CrO3−δ (LSCCe) is presented. LSCCe is selected as the electrode backbone structure, due to its superior total conductivity over that of LSC. The infiltration of catalytically highly active nickel nanoparticles into the sintered LSCCe electrode boosted the surface limiting reactions. 
    View PDF
    15 Citations

    Figures from this paper

    Figures

    15 Citations
    Citation Type

    Citation Type

    Catalytic surface promotion of highly active La0.85Sr0.15Cr0.8Ni0.2O3-δ anodes for La5.6WO11.4-δ based proton conducting fuel cells
    • 12
    • PDF
    Rational Design of Superior, Coking-Resistant, Nickel-Based Anodes through Tailoring Interfacial Reactions for Solid Oxide Fuel Cells Operated on Methane Fuel.
    • 5
    Novel solid oxide cells with SrCo0.8Fe0.1Ga0.1O3−δ oxygen electrode for flexible power generation and hydrogen production
    • 11
    Catalytic activation of ceramic H2 membranes for CMR processes
    • 11
    • PDF
    Outstanding hydrogen permeation through CO2-stable dual-phase ceramic membranes
    • 54
    Enhanced H2 separation through mixed proton-electron conducting membranes based on La5.5 W0.8 M0.2 O11.25-δ.
    • 67
    Low-temperature solid-oxide fuel cells based on proton-conducting electrolytes
    • 26
    • PDF
    Study of Pr and Pr and Co doped La2NiO4+δ as cathodes for La5.5WO11.25−δ based protonic conducting fuel cells
    • 17
    • PDF
    Development and understanding of La0.85Sr0.15Cr1−xNixO3−δ anodes for La5.6WO11.4−δ-based Proton Conducting Solid Oxide Fuel Cells
    • 6
    • PDF
    Evaluation of lanthanum tungstates as electrolytes for proton conductors Solid Oxide Fuel Cells
    • 11

    References

    SHOWING 1-10 OF 21 REFERENCES
    Mixed proton-electron conducting chromite electrocatalysts as anode materials for LWO-based solid oxide fuel cells.
    • 17
    LaCrO3-based anodes: stability considerations
    • 121
    Porous Ni/TiO2 substrates for planar solid oxide fuel cell applications
    • 19
    Nickel-ceria infiltrated Nb-doped SrTiO3 for low temperature SOFC anodes and analysis on gas diffusion impedance
    • 39
    High-performance composite cathodes with tailored mixed conductivity for intermediate temperature solid oxide fuel cells using proton conducting electrolytes
    • 87
    Electrochemical properties of composite fuel cell cathodes for La5.5WO12−δ proton conducting electrolytes
    • 36
    • PDF
    La0.9−xCaxCe0.1CrO3−δ as potential anode materials for solid oxide fuel cells
    • 16
    Adjusting the conduction properties of La0.995Ca0.005NbO4 − δ by doping for proton conducting fuel cells electrode operation
    • 27
    Thin-film proton BaZr0.85Y0.15O3 conducting electrolytes : Toward an intermediate-temperature solid oxide fuel cell alternative
    • 76
    Catalytic activity for steam methane reforming and physical characterisation of La1−xSrxCr1−yNiyO3−δ
    • 68