High-Performance Perovskite Single-Junction and Textured Perovskite/Silicon Tandem Solar Cells via Slot-Die-Coating

  title={High-Performance Perovskite Single-Junction and Textured Perovskite/Silicon Tandem Solar Cells via Slot-Die-Coating},
  author={Anand S. Subbiah and Furkan H. Isikgor and Calvyn T Howells and Michele De Bastiani and Jiang Liu and Erkan Aydin and Francesco Furlan and Thomas Wesley Allen and Fuzong Xu and Shynggys Zhumagali and Sjoerd Hoogland and Edward. H. Sargent and Iain McCulloch and Stefaan De Wolf},
  journal={ACS energy letters},
In this work we report perovskite solar cells in the planar p-i-n configuration based on single-step, anti-solvent free, low-temperature (70 oC) slot-die coated methylammonium lead tri-iodide (MAPb... 
Ligand-bridged charge extraction and enhanced quantum efficiency enable efficient n–i–p perovskite/silicon tandem solar cells
27%-efficient perovskite/silicon tandem solar cells are achieved in n–i–p configuration by developing novel electron and hole selective contacts, which combine high broadband transparency with
Vapor Transport Deposition of Methylammonium Iodide for Perovskite Solar Cells
Vapor-based processes are promising options to deposit metal halide perovskite solar cells in an industrial environment due to their ability to deposit uniform layers over large areas in a controll...
Potassium Thiocyanate‐Assisted Enhancement of Slot‐Die‐Coated Perovskite Films for High‐Performance Solar Cells
F.X. and J.L. contributed equally to this work. This work was supported by the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR) under award nos.:
Linked Nickel Oxide/Perovskite Interface Passivation for High‐Performance Textured Monolithic Tandem Solar Cells
Sputtered nickel oxide (NiOx) is an attractive hole‐transport layer for efficient, stable, and large‐area p‐i‐n metal‐halide perovskite solar cells (PSCs). However, surface traps and undesirable
Pressing challenges of halide perovskite thin film growth
The adoption of new thin-film materials in high-end technologies, such as monolithic tandem solar cells and integrated circuits, demands fabrication processes that allow a high level of control over
Comprehensive device simulation of 23.36% efficient two-terminal perovskite-PbS CQD tandem solar cell for low-cost applications
The perovskite-PbS CQD tandem device proposed in this work may pave the way for the development of high-efficiency tandem solar cells for low-cost applications.
Two-Terminal Perovskite-Based Tandem Solar Cells for Energy Conversion and Storage.
In this review, an overview of recent advances in various monolithic perovskite-based tandem solar cells with a focus on the key challenges is provided and it is hoped that this work can offer a feasible strategy to explore more possibilities for fabricating new two-terminal tandemSolar cells with high voltage and high conversion efficiency for energy conversion and storage.
Printing strategies for scaling-up perovskite solar cells
The view regarding the current challenges to fabrication of PSCs by printing techniques is shared, particularly on ink technologies, and the strategies for printing uniform, pinhole-free perovskite films with good crystallinity are summarized.


Large area perovskite solar cell module
The recent dramatic rise in power conversion efficiencies (PCE) of perovskite solar cells has triggered intense research worldwide. However, their practical development is hampered by poor stability
Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon
Tandems that combine solution-processed micrometer-thick perovskite top cells with fully textured silicon heterojunction bottom cells are reported, which presents the possibility of overcoming the single-junction Shockley-Queisser limit in photovoltaics.
Simple Method for Efficient Slot-Die Coating of MAPbI3 Perovskite Thin Films in Ambient Air Conditions
Dense, highly crystalline perovskite films with large grains were obtained by careful adjustment of the deposition parameters, using solutions that are similar but more dilute than those used in typical spin-coating procedures.
Novel Plasma-Assisted Low-Temperature-Processed SnO2 Thin Films for Efficient Flexible Perovskite Photovoltaics
The recent evolution of solution-processed hybrid organic–inorganic perovskite-based photovoltaic devices opens up the commercial avenue for high-throughput roll-to-roll manufacturing technology. To
Scalable Processing of Low-Temperature TiO2 Nanoparticles for High-Efficiency Perovskite Solar Cells
Most high-efficiency perovskite solar cells (PSCs) rely on titanium dioxide (TiO 2 ) electron transport layers (ETLs) that are usually processed at high temperature (>450 °C). Consequently, a fully
Scalable fabrication and coating methods for perovskite solar cells and solar modules
Since the report in 2012 of a solid-state perovskite solar cell (PSC) with a power-conversion efficiency (PCE) of 9.7% and a stability of 500 h, intensive efforts have been made to increase the
Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells
Inverted perovskite solar cells have attracted increasing attention because they have achieved long operating lifetimes. However, they have exhibited significantly inferior power conversion