Hardened properties of high-performance printing concrete

@article{Le2012HardenedPO,
  title={Hardened properties of high-performance printing concrete},
  author={Thanh Tung Le and Simon Austin and Sungwoo Lim and Richard A. Buswell and R. Law and Alistair Gibb and Tony Thorpe},
  journal={Cement and Concrete Research},
  year={2012},
  volume={42},
  pages={558-566}
}
  • T. Le, S. Austin, T. Thorpe
  • Published 1 March 2012
  • Materials Science, Engineering
  • Cement and Concrete Research
Basic Experimental Evaluation of Fresh and Hardened Properties of Mortar Using Additive Manufacturing
Recently, the three-dimensional concrete printing (3DCP) method has been garnering considerable interest owing to its ability to significantly reduce the construction time. In this study, 3D printing
3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
TLDR
The influence of variation of printing process parameters on the mechanical properties and reinforcement approaches used for increasing structural performance are explained and future research needs for 3D concrete printing are identified.
Hardened Properties of 3D Printable Ultra-High Performance Fiber-Reinforced Concrete for Digital Construction Applications
The current progress of 3D concrete printing technique is hampered by the limited range of printable concretes and reinforcing methods. To tackle both limitations, a 3D printable ultra-high
Impact of 3D Printing Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC)
Automatically adding or even printing steel reinforcements into a 3D-printed concrete structure is antithetical to the design freedom as well as construction ease and efficiency. Strain-Hardening
...
...

References

SHOWING 1-10 OF 19 REFERENCES
Mix design and fresh properties for high-performance printing concrete
This paper presents the experimental results concerning the mix design and fresh properties of a high-performance fibre-reinforced fine-aggregate concrete for printing concrete. This concrete has
Low-volume wet-process sprayed concrete: hardened properties
This paper, which reports on part of a 3-year research project into wet-process sprayed mortars and concretes for repair, investigates the hardened performance of wet-process sprayed fine concretes.
The hardened performance of wet process sprayed mortars [Published title: The performance of hardened wet-process sprayed mortars]
This paper, which reports on part of a three year research project into wet-process sprayed mortars and concretes for repair, investigates the hardened performance of wet process sprayed mortars.
Tensile bond testing of concrete repairs
The development and maintenance of a sound band is an essential requirement of a concrete patch repair. Tensile bond tests are increasing in popularity as a means of measuring this adhesive property,
Final report of RILEM TC 188-CSC ‘Casting of self compacting concrete’
Increased productivity and improved working environment have had high priority in the development of concrete construction over the last decade. Development of a material not needing vibration for
Shrinkage and creep of masonry mortar
Shrinkage and creep results are presented for different types of masonry mortars having a wide range of strength. The range of values implies that the type of mortar has an appreciable influence on
Overview and Future Trends of Shrinkage Research
Non-structural cracking of concrete is a serious problem and the underlying phenomena, namely, shrinkage and creep, need to be better understood. Much research has been devoted to this complex
...
...