• Corpus ID: 220347247

Graphene Aerogel Ink for the Inkjet Printing of the Micro-Supercapacitors

@article{Gaur2020GrapheneAI,
  title={Graphene Aerogel Ink for the Inkjet Printing of the Micro-Supercapacitors},
  author={Anand P. S. Gaur and Wenjun Xiang and P. Nepal and Brice Lacroix and Christopher M. Sorensen and S. R. Das},
  journal={arXiv: Applied Physics},
  year={2020}
}
The advances in the mass scale manufacturing of microscale energy storage devices via inkjet printing rely on the development of high-quality printable ink. The earth-abundant, non-toxic carbon materials such as graphene, carbon nanotube (CNT), reduced graphene oxide (r-GO) have shown excellent electrochemical performance and thus garnered significant interest as suitable electrode material. Here we report the formulation of printable graphene aerogel ink and the fabrication of the micro… 

Figures from this paper

References

SHOWING 1-10 OF 40 REFERENCES

Additive-free MXene inks and direct printing of micro-supercapacitors

TLDR
Highly concentrated, additive-free, aqueous and organic MXene-based inks that can be used for high-resolution extrusion and inkjet printing are reported.

Development of Graphene Oxide/Polyaniline Inks for High Performance Flexible Microsupercapacitors via Extrusion Printing

Extrusion printing of interdigitated electrodes for flexible microsupercapacitors (fMSCs) offers an attractive route to the fabrication of flexible devices where cost, scalability, and processability

Controlled porous structures of graphene aerogels and their effect on supercapacitor performance.

TLDR
Porous graphene aerogels from graphene suspensions obtained via electrochemical exfoliation are developed and explored their application as supercapacitor electrodes and provide a practical method for lightweight, high-performance and low-cost materials in the effective use of energy storage systems.

Micro-Supercapacitors Based on Interdigital Electrodes of Reduced Graphene Oxide and Carbon Nanotube Composites with Ultrahigh Power Handling Performance

A novel method for fabricating micro‐patterned interdigitated electrodes based on reduced graphene oxide (rGO) and carbon nanotube (CNT) composites for ultra‐high power handling micro‐supercapacitor

Liquid exfoliation of defect-free graphene.

  • J. Coleman
  • Chemistry, Materials Science
    Accounts of chemical research
  • 2013
TLDR
This Account describes recent work to develop such a processing route inspired by previous theoretical and experimental studies on the solvent dispersion of carbon nanotubes, and extends this process to exfoliate other layered compounds such as BN and MoS(2).

Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics

TLDR
Intense pulsed light (IPL) annealing of graphene inks is demonstrated for rapid post-processing of inkjet-printed patterns on various substrates, establishing this strategy as a practical and effective approach for the versatile and high-performance integrated graphene in printed and flexible electronics.

Scalable fabrication of high-power graphene micro-supercapacitors for flexible and on-chip energy storage.

TLDR
This work demonstrates a scalable fabrication of graphene micro-supercapacitors over large areas by direct laser writing on graphite oxide films using a standard LightScribe DVD burner, which demonstrates a power density among the highest values achieved for any supercapacitor.

On-chip and freestanding elastic carbon films for micro-supercapacitors

TLDR
A wafer-scale process for manufacturing strongly adhering carbide-derived carbon films and interdigitated micro-supercapacitors with embedded titanium carbide current collectors is described, fully compatible with current microfabrication and silicon-based device technology.

High-yield production of graphene by liquid-phase exfoliation of graphite.

TLDR
Graphene dispersions with concentrations up to approximately 0.01 mg ml(-1), produced by dispersion and exfoliation of graphite in organic solvents such as N-methyl-pyrrolidone are demonstrated.