Generalized master curve procedure for elastomer friction taking into account dependencies on velocity, temperature and normal force

@article{Popov2016GeneralizedMC,
  title={Generalized master curve procedure for elastomer friction taking into account dependencies on velocity, temperature and normal force},
  author={Valentin L Popov and Lars Voll and Stephan Kusche and Qiang Li and Svetlana Rozhkova},
  journal={arXiv: Materials Science},
  year={2016}
}
In the sliding contact of elastomer on a rigid substrate, the coefficient of friction may depend on a large number of system and loading parameters, including normal force, sliding velocity, shape of contacting bodies, surface roughness and so on. It was argued earlier that the contact configuration is determined more immediately through the indentation depth than the normal force, and thus the indentation depth can be considered as one of “robust governing parameters” of friction. Both models… Expand
Transient and Steady Sliding Friction of Elastomers: Impact of Vertical Lift
The sliding friction of elastomers has been investigated numerically and theoretically for the line contact between a cylindrical rigid indenter and a “frictionless” Kelvin–Voigt foundation. TheExpand
Heterogeneity of material structure determines the stationary surface topography and friction
TLDR
The main conclusion is that the rms value of the surface slope is not influenced by the characteristic linear size of inclusions and depends solely on the relative concentration of phases, as well as the ratio of their wear coefficients. Expand
Green’s function molecular dynamics including viscoelasticity
The contact mechanical response of various polymers is controlled by the viscoelastic behavior of their bulk and the adhesive properties of their interface. Due to the interplay betweenExpand
Local contact formation during sliding on soft adhesive surfaces with complex microstructuring
Abstract Friction on biological-like micro-structured surfaces has been investigated. Using a bio-replication technique, complex surface morphologies found in plant leaves were transferred ontoExpand
Verallgemeinerte Reib- und Adhäsionsgesetze für den Kontakt mit Elastomeren: Theorie und Experiment
This research work deals with two related issues in the field of tribology: elastomer friction and adhesion of elastomers. Despite enormous practical importance and several years of research manyExpand
The Influence of Hydrothermal Aging on the Dynamic Friction Model of Rubber Seals
TLDR
The improved cylinder friction model can describe the influence of the aging process on the cylinder friction characteristics, which is of great significance in the design of the cylinder’s dynamic performance. Expand
Elastomers’ wear: Comparison of theory with experiment
Abstract Wear of elastomers is different and far more complex than that of metallic materials, which arises owing to the effect of various operating parameters as well as physical and mechanicalExpand
Editorial: Contact Mechanics Perspective of Tribology
It is a time to gather stones. . . The Research Topic (RT) “Contact Mechanics Perspective of Tribology” was planned as a comprehensive overview of recent developments in the areas of contactExpand
Finite Element Study of Mixed Fracture: Velocity-Dependent Insertion Of Pointed Blades Into Soft Material
This study concerns the effect of applied velocity on the energy state and stress state related to the puncture-cutting of soft material. A finite element modeling (FEM) of combined puncture and cu...

References

SHOWING 1-10 OF 34 REFERENCES
Generalized law of friction between elastomers and differently shaped rough bodies
TLDR
Analytical relations describing the coefficient of friction in a wide range of loading conditions and a master curve procedure for the dependence on the normal force are suggested. Expand
Friction between a viscoelastic body and a rigid surface with random self-affine roughness.
TLDR
An important implication of the analytical result is the extension of the well-known "master curve procedure" to the dependencies on the normal force and the size of the system. Expand
Evaluation of sliding friction and contact mechanics of elastomers based on dynamic-mechanical analysis.
TLDR
The paper presents a combined experimental and theoretical approach to the understanding of hysteresis and adhesion contributions to rubber friction on dry and lubricated rough surfaces and it is found that the formulated adhesion plays a dominant role on rough dry surfaces within this range of velocities. Expand
Friction between a temperature dependent viscoelastic body and a rough surface
In this study, we investigate the friction between a one-dimensional elastomer and a one-dimensional rigid randomly rough surface. Special emphasis is laid on the temperature dependence of theExpand
The viscoelastic nature of the sliding friction of polyethylene, polypropylene and copolymers
Abstract According to the adhesion theory of sliding friction, the sliding force or frictional resistance to motion is due to making and breaking of adhesional bonds between the sliding bodies. ThusExpand
Sliding friction of rubber and Schallamach waves: a review
Abstract The phenomena accompanying the friction of a single hard hemispherical asperity on a smooth surface of a soft elastomer are studied at a microscale level as a function of the followingExpand
The relation between the friction and visco-elastic properties of rubber
  • K. Grosch
  • Materials Science
  • Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences
  • 1963
This paper describes a study of the friction of several types of rubber against hard surfaces over a wide range of temperatures and sliding velocities. The highest velocity did not exceed a fewExpand
Maximum micro-slip in tangential contact of randomly rough self-affine surfaces
Abstract Many advanced laws of friction contain a characteristic length parameter defining the crossover from sticking to sliding. The physical sense and the scaling properties of this length,Expand
Theory of rubber friction and contact mechanics
When rubber slides on a hard, rough substrate, the surface asperities of the substrate exert oscillating forces on the rubber surface leading to energy “dissipation” via the internal friction of theExpand
Partial-slip frictional response of rough surfaces
TLDR
A universal linear dependency between the real contact area fraction in stick condition and the applied tangential force is found, regardless of the Hurst exponent of the rough surfaces. Expand
...
1
2
3
4
...