• DOI:10.2514/1.18034
• Corpus ID: 54063370

Gas Turbine Film Cooling

@article{Bogard2006GasTF,
  title={Gas Turbine Film Cooling},
  author={David G. Bogard and Karen A. Thole},
  journal={Journal of Propulsion and Power},
  year={2006},
  volume={22},
  pages={249-270}
}

• D. Bogard, K. Thole
• Published 1 March 2006
• Engineering, Physics
• Journal of Propulsion and Power

The durability of gas turbine engines is strongly dependent on the component temperatures. For the combustor and turbine airfoils and endwalls, film cooling is used extensively to reduce component temperatures. Film cooling is a cooling method used in virtually all of today's aircraft turbine engines and in many power-generation turbine engines and yet has very difficult phenomena to predict. The interaction of jets-in-crossflow, which is representative of film cooling, results in a shear layer that leads to mixing and a decay in the cooling performance along a surface. This interaction is highly dependent on the jet-to-crossflow mass and momentum flux ratios. Film-cooling performance is difficult to predict because of the inherent complex flowfields along the airfoil component surfaces in turbine engines. Film cooling is applied to nearly all of the external surfaces associated with the airfoils that are exposed to the hot combustion gasses such as the leading edges, main bodies, blade tips, and endwalls. In a review of the literature, it was found that there are strong effects of freestream turbulence, surface curvature, and hole shape on the performance of film cooling. Film cooling is reviewed through a discussion of the analyses methodologies, a physical description, and the various influences on film-cooling performance.