• Corpus ID: 3922940

GENERAL WAKE-UP RADIO MODULE FOR ISM BAND

@inproceedings{Tajudeen2018GENERALWR,
  title={GENERAL WAKE-UP RADIO MODULE FOR ISM BAND},
  author={Mohammed Ashiq Rahman Tajudeen},
  year={2018}
}
With the word of smart, the whole world is running on the smart technologies and smart devices which are fairly constructed by wireless sensors networks. The heart of the WSNs are nodes, which are ... 
hh.diva-portal.org

References

SHOWING 1-10 OF 11 REFERENCES
A new wake-up radio architecture for wireless sensor networks
TLDR
A wake-up radio circuit which is capable of both addressing and waking up not only a more efficient but also more energy-consuming radio front end by using a frequency footprint to differentiate each sensor.
An Ultra-Low Power Wake-Up Receiver for Real-time constrained Wireless Sensor Networks
TLDR
An ultra-low power WuRx is introduced that drains less than 3 μA with a sensitivity −60 dBm and can decode a 16-bit wake-up packet (WuPt) with minimally 1% of PER in nearly 10 ms.
Low power wake-up receiver for wireless sensor nodes
TLDR
A new approach for a wake-up receiver that consumes 2.78 µA of current and integrates a 16 bit address coding for a selective wake-ups is presented, achieving a 20 times farther wakeup range and a 100 times lower current consumption.
Radio-Triggered Wake-Up for Wireless Sensor Networks
TLDR
Wake-up efficiency is evaluated in NS-2 simulations, which show that radio-triggered wake-up has fewer failures, shorter latency, and consistently larger sensing laxity than rotation based wake- up.
An ultra low power high sensitivity wake-up radio receiver with addressing capability
  • M. Magno, L. Benini
  • Computer Science
    2014 IEEE 10th International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob)
  • 2014
TLDR
A novel low power tunable wake up radio with addressing capability, a minimal power consumption of only 196nW and a maximum sensitivity of -55dBm and minimal wake up time of 130μs without addressing and around 1,6ms with 2byte addressing at 10Kbit/s data rate is presented.
Beyond duty cycling: Wake-up radio with selective awakenings for long-lived wireless sensing systems
TLDR
ALBA-WUR is presented, a cross-layer solution for data gathering in sensing systems that redesigns a previous leading protocol, ALBA-R, extending it to exploit the features of the WRx, and the performance is evaluated via simulations.
The Design of CMOS Radio-Frequency Integrated Circuits
This expanded and thoroughly revised edition of Thomas H. Lee's acclaimed guide to the design of gigahertz RF integrated circuits features a completely new chapter on the principles of wireless…
Datasheet AS3933 - 3D Low frequency wakeup receiver
  • Revision 1.0,
  • 2010
Performance Evaluation and Comparative Analysis of SubCarrier Modulation Wake-up Radio Systems for Energy-Efficient Wireless Sensor Networks
TLDR
A novel wake-up radio approach that integrates both data communication and wake- up functionalities into one platform, providing a reconfigurable radio operation and stands out as a strong candidate for any application requiring energy-efficient wireless sensor node communications.
Design of RF energy harvesting system for energizing low power devices
TLDR
This article presents an RF energy harvesting system that can harvest energy from the ambient surroundings at the downlink radio frequency range of GSM-900 band to provide an alternative source of energy for energizing low power devices.
...
...