Fuzzy PI control design for an industrial weigh belt feeder

@article{Zhao2003FuzzyPC,
  title={Fuzzy PI control design for an industrial weigh belt feeder},
  author={Yanan Zhao and E. Collins},
  journal={IEEE Trans. Fuzzy Syst.},
  year={2003},
  volume={11},
  pages={311-319}
}
An industrial weigh belt feeder is used to transport solid materials into a manufacturing process at a constant feedrate. It exhibits nonlinear behavior because of motor friction, saturation, and quantization noise in the sensors, which makes standard autotuning methods difficult to implement. The paper proposes and experimentally demonstrates two types of fuzzy logic controllers for an industrial weigh belt feeder. The first type is a PI-like fuzzy logic controller (FLC). A gain scheduled PI… Expand
A Modified PI-Like Fuzzy Logic Controller for Switched Reluctance Motor Drives
  • S. Wang, Yi-Hua Liu
  • Mathematics, Computer Science
  • IEEE Transactions on Industrial Electronics
  • 2011
Based on the redevelopment of control rule base, two modified PI-like fuzzy logic controllers with output scaling factor (SF) self-tuning mechanism are proposed and verified in this paper forExpand
Design of PI fuzzy logic controller to overcome belt weigh feeder system nonlinearity
TLDR
PI Fuzzy Logic controller is designed for control of belt weigh feeder and results indicate substantial improvement in control accuracy of the system with PI FuzzY Logic controller. Expand
A correction PI-like fuzzy logic controller for SRM drives system
Based on the rebuilt of control rule base, a modified type PI-like fuzzy logic controller (FLC) with output scaling factor (SF) self-tuning mechanism is proposed in this paper for application in theExpand
A modified PI-like fuzzy logic controller for switched reluctance motor drive
Based on the redevelopment of control rule base, a modified type PI-like fuzzy logic controller with output scaling factor (SF) self-tuning mechanism is proposed and experimentally testified in thisExpand
Self-Tuning of PI Speed Controller Gains Using Fuzzy Logic Controller
TLDR
The simulation results show that the developed controller can well adapt to speed changes as well as sudden speed reduction besides fast recovery from load torque and parameters variation and these show remarkable improvement compared to conventional PI controller performance. Expand
Fuzzy Logic Based PI Closed Loop Control of Switched Reluctance Motor Drives Using Z-Source Inverter
TLDR
The aim of this paper is to simplify the program complexity of the controller by reducing the number of fuzzy sets of the membership functions without losing the system performance and stability via the adjustable controller gain. Expand
A self-tuning fuzzy controller with union rule base for switched reluctance motor drives
This paper presents a modified self-tuning fuzzy controller with union rule base for application in the switched reluctance motor (SRM) drive system. Based on the redevelopment of control rule base,Expand
Comparison of two approaches to automated PI controller tuning for an industrial weigh belt feeder.
TLDR
A detailed comparison of the two approaches is given in the areas of allowed design specifications, process knowledge requirements, computational requirements, controller development effort, transient performance, and the ability to handle motor saturation. Expand
A Fuzzy PID-Based Cascade Control for Continuous Material Weighing Conveyor
TLDR
A nonlinear model of the continuous weighing conveyor system as considering the delay time of material transport, and a novel two-loop control strategy based on PID combined with fuzzy logic: inner velocity control loop and outer mass flowrate control loop are presented. Expand
Performance evaluation of classical and fuzzy logic control techniques for brushless DC motor drive
  • M. Kalavathi, C. Reddy
  • Engineering
  • 2012 IEEE International Power Modulator and High Voltage Conference (IPMHVC)
  • 2012
High efficiency due to reduced losses, low maintenance and low rotor inertia of the brushless dc (BLDC) motor have increased the demand of BLDC motors in high power servo and robotic applications.Expand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 37 REFERENCES
A self-tuning fuzzy PI controller
TLDR
Results for various processes show that the proposed self-tuning FLC outperforms its conventional counterpart in each case. Expand
Application of hybrid fuzzy logic proportional plus conventional integral-derivative controller to combustion control of stoker-fired boilers
  • Wei Li, X. Chang
  • Mathematics, Computer Science
  • Fuzzy Sets Syst.
  • 2000
TLDR
A hybrid fuzzy logic proportional plus conventional integral-derivative (FUZZY P+ID) controller is presented to improve the control performance yielded by the PID-type controller. Expand
Fuzzy PID controller: Design, performance evaluation, and stability analysis
TLDR
The main motivation for this design was to control some known nonlinear systems, such as robotic manipulators, which violate the conventional assumption of the linear PID controller. Expand
A self-tuning fuzzy controller
Abstract The aim of a fuzzy controller is to compensate the dynamic characteristics of the controlled system. It is the same purpose as for the fuzzy logic controller, FLC. Now the best design of theExpand
Fuzzy self-tuning of PID controllers
Abstract This paper presents a novel fuzzy self-tuning PID control scheme for regulating industrial processes. The essential idea of the scheme is to parameterize a Ziegler-Nichols-like tuningExpand
On methods for improving performance of PI-type fuzzy logic controllers
  • Jihong Lee
  • Mathematics, Computer Science
  • IEEE Trans. Fuzzy Syst.
  • 1993
TLDR
Two types of fuzzy logic controllers are proposed that take out appropriate amounts of accumulated control input according to fuzzily described situations in addition to the incremental control input calculated by conventional fuzzy PI controllers. Expand
Parallel structure and tuning of a fuzzy PID controller
TLDR
By virtue of using the simplest structure of fuzzy logic control, the stability of the nonlinear control system can be analyzed and a sufficient BIBO stability condition is given. Expand
A genetic search approach to unfalsified PI control design for a weigh belt feeder
This paper proposes and experimentally demonstrates an approach to automated PI tuning for an industrial weigh belt feeder that is based on unfalsified control concepts. Unfalsified control is usedExpand
A PD-like self-tuning fuzzy controller without steady-state error
TLDR
A simple but efficient method for fully compensating for steady-state error, which is the main problem in a PD-like fuzzy logic control system, is proposed so that tuning for fuzzy logic rule bases is unnecessary. Expand
A systematic study of fuzzy PID controllers-function-based evaluation approach
TLDR
It is concluded that direct-action controllers exhibit simpler design properties than gain-scheduling controllers, and the Zadeh-Mamdani's "max-min- gravity" scheme produces the highest score in terms of nonlinearity variations, which is superior to other schemes, such as Mizumoto's "product-sum-gravity" and "Takagi-Sugeno-Kang" schemes. Expand
...
1
2
3
4
...