Corpus ID: 194452151

Functional model of photopolymer printing plate production process = Funkcionalni model procesa izrade fotopolimerne tiskovne forme

@inproceedings{Tomaegovi2016FunctionalMO,
  title={Functional model of photopolymer printing plate production process = Funkcionalni model procesa izrade fotopolimerne tiskovne forme},
  author={Tamara Toma{\vs}egovi{\'c}},
  year={2016}
}
Analiza utjecaja UVA i UVC post-ekspozicija u procesu izrade fotopolimerne tiskovne forme za fleksotisak u ovom doktorskom radu provedena je pomocu razlicitih metoda mjerenja i analize. Fotopolimerni uzorci koristeni u ovom istraživanju bili su Computer to Plate (CtP) Laser Ablation Mask Layer (LAMS) tiskovne forme za fleksotisak sa vodenim i solventnim razvijanjem. Analiza njihovih kemijskih, toplinskih, mehanickih i povrsinskih svojstava provedena je s ciljem definiranja i… Expand
Effect of the Common Solvents on UV-Modified Photopolymer and EPDM Flexographic Printing Plates and Printed Ink Films
The aim of this research was to analyze the influence of the solvents commonly used in flexography on photopolymer and ethylene propylene diene monomer (EPDM) flexographic printing plates and prints.Expand
Neural network-based UV adjustment of the photopolymer surface for modification of coating properties printed in flexography
Processes of coating deposition often rely on printing techniques, with flexography being the most common one because of its ability to adjust the medium for the coating transfer (printing plate) toExpand
Thermal, Surface and Mechanical Properties of PCL/PLA composites with coconut fibres as an alternative material to photopolymer printing plates
In this paper, methods of thermal, mechanical and surface analyses of biodegradable PCL/PLA composites with the addition of different concentrations of coconut fibres were performed. The aim was toExpand

References

SHOWING 1-10 OF 101 REFERENCES
Comparative study by DSC and FTIR techniques of an unsaturated polyester resin cured at different temperatures
1 Escuela Universitaria de Ingenier•“a Te“cnica Industrial, Departamento de Ingenieria Qu•“mica y Medio Ambiente, Universidad delPa•“s Vasco/Euskal Herriko Unibertsitatea, Avda. Felipe IV, 1B. 20011Expand
Surface properties of flexographic printing plates related to UVC post-treatment
Flexography is a printing technique mostly used in packaging printing. Flexographic printing plates are made of photopolymer materials, formulated to meet mechanical and qualitative requirements inExpand
Tailoring the properties of deposited thin coating and print features in flexography by application of UV-ozone treatment
Printed functional materials are a rapidly growing area of interest for low-cost high-speed device manufacture with flexographic printing seen as a route to achieving this. The relationship betweenExpand
UVA and UVC modification of photo polymeric surface and application for flexographic deposition of thin coatings
The object of this research was to perform, characterize, and apply the functional modification of flexographic photo polymeric printing plate surface by UVA and UVC post- treatments. Photo polymericExpand
Characterization of Cure Kinetics and Physical Properties of a High Performance, Glass Fiber-Reinforced Epoxy Prepreg and a Novel Fluorine-Modified, Amine-Cured Commercial Epoxy.
Kinetic equation parameters for the curing reaction of a commercial glass fiber reinforced high performance epoxy prepreg composed of the tetrafunctional epoxy tetraglycidyl 4,4-diaminodiphenylExpand
Characterization of the silver halide printing plate's surface properties
Lithography is a highly complex process, based on different physical-chemical properties of image and nonimage areas. Image areas are hydrophobic and oleophilic which enables them to adsorb printingExpand
Application of FTIR in structural analysis of flexographic printing plate
The aim of this paper was to characterize the chemical structure of the photopolymer material of the printing plates used in flexography. It was based on the presumption that it is possible to defineExpand
Formation of the Printing Elements in the Photopolymer Material Used in Flexography
Starting point of this paper is photopolymer printing plate used for flexographic printing. It is used for transfer of the printing ink onto the printing surface during the reproduction process.Expand
Application of Finite Elements on Non-Linear Deformation of Flexographic Photopolymer Printing Plate
offers the possibility of producing mass quantities of a wide variety of electronic components and devices quickly and at lower cost. Flexography is mainly used for packaging applications, but isExpand
A model for improving the flexographic printing plate making process
Thermal development process of photopolymer printing plates is one of the newest technologies in the flexographic reproduction process. It is solely based on mechanical process and thus enables theExpand
...
1
2
3
4
5
...