Functional Acrylic Polymer as Corrosion Inhibitor of Carbon Steel in Autoclaved Air-Foamed Sodium Silicate-Activated Calcium Aluminate/Class F Fly Ash Cement

@article{Sugama2013FunctionalAP,
  title={Functional Acrylic Polymer as Corrosion Inhibitor of Carbon Steel in Autoclaved Air-Foamed Sodium Silicate-Activated Calcium Aluminate/Class F Fly Ash Cement},
  author={Toshifumi Sugama and Tatiana Pyatina},
  journal={Engineering},
  year={2013},
  volume={5},
  pages={887-901}
}
The study focused on investigating the effectiveness of functional acrylic polymer (AP) in improving the ability of airfoamed sodium silicate-activated calcium aluminate/Class F fly ash cement (slurry density of £1.3 g/cm3) to mitigate the corrosion of carbon steel (CS) after exposure to hydrothermal environment at 200?C or 300?C. Hydrothermally-initiated interactions between the AP and cement generated the formation of Ca-, Al-, or Na-complexed carboxylate derivatives that improved the… 
3 Citations
Inorganic Corrosion-Inhibitive Pigments for High-Temperature Alkali-activated Well Casing Foam Cement
This study evaluates inorganic pigments for improving carbon steel (CS) brine-corrosion protection by the sodium metasilicate-activated calcium aluminate cement/Fly Ash blend at 300°C. Calcium

References

SHOWING 1-10 OF 13 REFERENCES
HYDROTHERMALLY SELF-ADVANCING HYBRID COATINGS FOR MITIGATING CORROSION OF CARBON STEEL.
Hydrothermally self-advancing hybrid coatings were prepared by blending two starting materials, water-borne styrene acrylic latex (SAL) as the matrix and calcium aluminate cement (CAC) as the
Corrosion performance of reinforced mortar in the presence of polymeric nano-aggregates: electrochemical behavior, surface analysis, and properties of the steel/cement paste interface
This study reports on the effect of admixed polyethylene oxide-b-polystyrene (PEO113-b-PS70) micelles on corrosion behavior of reinforced mortar. The electrochemical measurement shows that the
Air-foamed calcium aluminate phosphate cement for geothermal wells
Thermal Shock-resistant Cement
We studied the effectiveness of sodium silicate-activated Class F fly ash in improving the thermal shock resistance and in extending the onset of hydration of Secar #80 refractory cement. When the
Influence of fly ash on corrosion resistance and chloride ion permeability of concrete
Corrosion inhibition of reinforcing steel by using acrylic latex
...
1
2
...