Flow Properties and Morphology of PC/LCP Blends Affected by the Addition of Glass Fiber and Resulted Mutual Influences

@article{Zheng2003FlowPA,
  title={Flow Properties and Morphology of PC/LCP Blends Affected by the Addition of Glass Fiber and Resulted Mutual Influences},
  author={X. Zheng and B. Zhang and Jun Zhang and Y. Xue and J. Z. He},
  journal={International Polymer Processing},
  year={2003},
  volume={18},
  pages={3 - 11}
}
  • X. Zheng, B. Zhang, +2 authors J. He
  • Published 1 March 2003
  • Materials Science
  • International Polymer Processing
Abstract In-situ hybrid composites containing matrix polycarbonate, glass fiber and LCP are prepared. The morphology of LCP and the rheological behavior of the composites are described. The relationship between flowability and morphology is discussed. It is interesting to find that in some hybrid systems, composites containing more glass fiber have better flowability than composites containing less glass fiber. Glass fiber aspect ratio is an important factor that determines the flowability… 
Rheological hybrid effect in dually filled polycarbonate melt containing liquid crystalline polymer
Polycarbonate (PC)/liquid crystalline polymer (LCP) blends dually filled with glass fiber and nano-SiO2 were prepared by melt blending, with the use of a commercial Vectra A130 as the source of LCP
A gradient structure formed in injection-molded polycarbonate in situ hybrid composites and its corresponding performances
Three polycarbonate (PC) composites that were reinforced, respectively, with liquid crystalline polymer (LCP), glass fibers, and both of them were prepared by a single injection-molding process. The
Mutual influence of the morphology and capillary rheological properties in nylon/glass‐fiber/liquid‐crystalline‐polymer blends
Nylon-6/glass-fiber (GF)/liquid-crystalline-polymer (LCP) ternary blends with different viscosity ratios were prepared with three kinds of nylon-6 with different viscosities as matrices. The
Morphology evolution of a liquid crystalline polymer in polycarbonate matrix enhanced by the addition of glass beads
Polycarbonate (PC)/liquid crystalline polymer (LCP)/glass bead (GB) composites filled with various volume fractions of GB were melt blended and characterized with rheological measurements and
Rheological hybrid effect in nylon 6/liquid crystalline polymer blends caused by added glass beads
Abstract The “Rheological hybrid” effect, a phenomenon in which the melt viscosity of a ternary polymer blend decreases with increasing filler loading, due to the influence of the minor polymer phase
Effect of glass bead packing on the fibrillation of liquid‐crystalline polymer in polycarbonate
Polycarbonate (PC) was melt blended with small amount of liquid-crystalline polymer (LCP) and various contents of glass beads (GB) having different diameters. The rheological measurements indicated
Noticeable viscosity reduction of polycarbonate melts caused jointly by nano‐silica filling and TLCP fibrillation
Nano-SiO2 was introduced into in-situ composites of polycarbonate (PC) and a thermotropic liquid crystalline polymer (TLCP) using a twin-screw extruder. The rheology of these composites was
Inhibited transesterification and enhanced fibrillation of TLCP by nano-SiO2 in polycarbonate matrix
Abstract Hybrid composites composed of a thermotropic liquid crystalline polymer (TLCP), nano-SiO 2 and polycarbonate (PC) were prepared by melt blending in a twin-screw extruder. Infrared
Enhanced fibrillation of LCP by CaCO3 whisker in polysulfone matrix through increasing elongational stress
Abstract Induced by different fillers, various hydrodynamic effects enhance the fibrillation of liquid crystalline polymer (LCP) in in situ hybrid composites. Through choosing CaCO 3 whisker as the
Hierarchical structure of thermotropic liquid crystalline polymer formed in blends jointly by dynamic and thermodynamic driving forces
The hierarchical structure of thermotropic liquid crystalline polymer (TLCP), especially microfibrils with an average diameter of 30 nm has been obtained in polyamide 6 (PA6)/TLCP/glass bead (GB)
...
1
2
...

References

SHOWING 1-5 OF 5 REFERENCES
Flow Properties and Morphology of PC/LCP Blends Intern
  • Polymer Processing XVIII
  • 2003
Handbook of Engineering Polymeric Material
  • 1997
Polymer Composites 8
  • 1987
Polymer 26
  • 1985