• Corpus ID: 209504893

Flexural strength of relined denture base using different thickness of self-cured relining material

@inproceedings{Hout2017FlexuralSO,
  title={Flexural strength of relined denture base using different thickness of self-cured relining material},
  author={Danielle van Hout and Amornrat Wonglamsam and W. Kanchanavasita},
  year={2017}
}
Objectives: To evaluate the flexural strength of a heat-cured denture base polymer relined with different thickness of self-cured relining materials. Materials and methods: Two different thickness ratios (1.5:1.5 and 2:1) of one heat-cured denture base polymer (ProBase Hot) to three self-cured hard relining materials (Kooliner PEMA, Tokuyama Rebase II PEMA and Unifast Trad PMM) were examined. Three point bending flexural test was applied on the relined specimens (64mm ×10mm×3mm) and on intact… 

Figures and Tables from this paper

Comparison of shear bond strength of CAD/CAM and conventional heat-polymerized acrylic resin denture bases to auto-polymerized and heat-polymerized acrylic resins after aging

Heat-cured reline resin showed higher shear bond strength to both CAD/CAM and conventional heat-polymerized denture resin in comparison to self-c cured reline resins.

COMPARATIVE STUDY OF THE FLEXURAL STRENGTH OF MAXILLARY DENTURE BASES MADE IN CONVENTIONAL AND HIGH IMPACT HEAT CURE ACRYLIC RESIN

High impact acrylic resin was found to have significantly higher flexure strength as compared to conventional acrylic resin.

Clinicians need a relining or rebasing procedure

Clinician must understand the indications, contraindications and materials used for the relining and rebasing procedure to restore the retention and stability of loose dentures.

References

SHOWING 1-10 OF 48 REFERENCES

Flexural strength of rebased denture polymers.

The results showed that the flexural strength of relined denture base polymer was significantly higher than that of hard reline resin, whereas the dentures base polymer and reline polymer alone showed a decrease in strength after thermocycling.

In-vitro study of the fracture resistance of denture base resin with resilient reline material

The results of this study demonstrated that a new relining resin, Tokuyama Rebase II, provides higher elasticity, resilience, and durability than Tokuso Rebase.

Effect of reline material and denture base surface treatment on the impact strength of a denture base acrylic resin.

The IS of specimens made from heat polymerising acrylic resin Lucitone 550 was increased after relining using the hard chairside reline resin TR with its proprietary BA.

Strength of relined denture base polymers subjected to long-term water immersion.

The present study showed that the long-term equilibrium strengths of 4 dentures reline polymers processed onto 4 denture base polymers were different, which indicated that the strength of the relined specimen of a dentures base is dependent on thestrength of the dentur base polymer and that of the relay polymer.

Shear bond strength of two chemically different denture base polymers to reline materials.

  • F. AhmadMcLin DentN. Yunus
  • Materials Science, Medicine
    Journal of prosthodontics : official journal of the American College of Prosthodontists
  • 2009
The two chemically different denture base polymers showed different shear bond strength values to corresponding reline materials.

Relining of prosthesis with auto-polymerizing hard denture reline resins: effect of post-polymerization treatment on flexural strength.

Microwave PP (650 W for 5 min) proved to be an effective method of improving the flexural strength of K relined prosthesis, however, it did not seem to affect NT specimens.

Effect of Surface Treatment on the Flexural Strength of Denture Base Resin and Tensile Strength of Autopolymerizing Silicone Based Denture Liner Bonded to Denture Base Resin: An In Vitro Study

  • Saloni Gupta
  • Materials Science, Medicine
    Journal of Indian Prosthodontic Society
  • 2010
180 s of MMA monomer treatment was found to be most effective in improving the bonding between the liner and dentures base resin as well as producing the lowest decrease in flexural strength of denture base resin.

Influence of thermal and mechanical stresses on the strength of intact and relined denture bases.

Assessment of shear bond strength between three denture reline materials and a denture base acrylic resin.

  • Y. TakahashiJ. Chai
  • Medicine, Materials Science
    The International journal of prosthodontics
  • 2001
Triad bonding agent and denture base monomer applications most significantly improved the bond strengths of Triad and GC reline, respectively.

Bonding strength between a hard chairside reline resin and a denture base material as influenced by surface treatment.

The bond strength provided by all the surface treatments was lower than that of the intact heat-cured resin, and both the surface treatment with Lucitone 550 monomer or chloroform were stronger than the majority of the other groups.