• Corpus ID: 56370973

Fault Identification and Protection of Induction Motor using PLC and SCADA

  title={Fault Identification and Protection of Induction Motor using PLC and SCADA},
  author={Sujith Mathew and B.Hemalatha},
  journal={International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy},
  • Sujith Mathew, B.Hemalatha
  • Published 2014
  • Engineering
  • International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy
Problems that arise with the working of an AC induction motor is common these days if left unmonitored. Here a protection system is implemented using which we monitor the working of an AC induction motor during normal conditions and trip conditions. If any problems become evident due to faults that normally happen in the motor like stator faults, rotor faults, bearing faults, eccentricity faults etc., we can either vary the input voltage and current to bring the motor back to normal condition… 
5 Citations

Figures from this paper

Fault Detection, Indication & Protection of Induction Motor by Several Modified Techniques
The circuit will control the 3 phase induction motor and it will first detect faults of motor like over voltage, under voltage, over current, under current and after circuit will indicate that faults, it will protect induction motor from faults.
Protection of Induction Motor from Abnormal Conditions Using PLC
Protection of an induction motor (IM) against possible problems such as over voltage, over current, over temperature and under voltage since it is used intensively in industry as an actuator. IMs can
The objective of this paper is to design, develop and testing the “Real time implementation of PLC,SCADA system for ratio control based bottle filling plant”, which will provide low operational cost, low power consumption, accuracy and flexibility to the system and at the same time it will provide accurate volume of liquid in bottle by saving operational time.
Recognition of fault and security of three phase induction motor by means of programmable logic controller
This paper presents a fault protection of three phase induction motor. Induction motor is common in many industries. Fault can be occurred due to over speed, over load, high temperature, vibration,
Design & Implementation of Parameter Monitoring &Controlling of Induction Motor & Transformer using Gsm with Plc
This project at monitoring the temperature, current and voltage in induction motors and transformer in real time by employing wireless sensor networks (WSNs) using PLC base system for torque and efficiency estimation.


On innovative methods of induction motor interturn and broken-bar fault diagnostics
A fault indicator, the so-called swing angle, for broken-bar and interturn faults is investigated in this paper. This fault indicator is based on the rotating magnetic-field pendulous-oscillation
Fault Detection and Protection of Induction Motors Using Sensors
Protection of an induction motor (IM) against possible problems, such as overvoltage, overcurrent, overload, overtemperature, and undervoltage, occurring in the course of its operation is very
Induction motors' faults detection and localization using stator current advanced signal processing techniques
The knowledge about fault mode behavior of an induction motor drive system is extremely important from the standpoint of improved system design, protection, and fault-tolerant control. This paper
A review of stator fault monitoring techniques of induction motors
Condition monitoring of induction motors is a fast emerging technology for online detection of incipient faults. It avoids unexpected failure of a critical system. Approximately 30-40% of faults of
An on-line stator winding resistance estimation technique for temperature monitoring of line-connected induction machines
  • S.B. Lee, T. Habetler
  • Engineering
    Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248)
  • 2001
A new technique for stator resistance (R/sub s/)-based thermal monitoring of small line-connected induction machines is proposed in this paper. A simple device is developed for injecting a small DC
Design and implementation of PLC-based monitoring control system for induction motor
Tests of the induction motor system driven by inverter and controlled by PLC prove a higher accuracy in speed regulation as compared to a conventional V/f control system.
A thermal monitoring and parameter tuning scheme for induction machines
  • K. D. Hurst, T. Habetler
  • Engineering
    IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting
  • 1997
The proposed algorithm can be used to predict insulation failure in the machine and to tune the parameters of a thermal model for overload protection, and by combining this approach with trend analysis, a supervisory algorithm can detect incipient failures in the electrical integrity of the machine.
Induction Machine Broken Bar and Stator Short-Circuit Fault Diagnostics Based on Three-Phase Stator Current Envelopes
A new method for the fault diagnosis of a broken rotor bar and interturn short circuits in induction machines (IMs) is presented. The method is based on the analysis of the three-phase stator current