Fabrication and characterization of gold/acrylic polymer nanocomposites

@article{Burunkova2013FabricationAC,
  title={Fabrication and characterization of gold/acrylic polymer nanocomposites},
  author={Julia Burunkova and Ihor Yu Denisiuk and Nadezda Vorzobova and L. Daroczi and Csaba Hegedűs and S. Charnovych and S{\'a}ndor Kokenyesi},
  journal={European Polymer Journal},
  year={2013},
  volume={49},
  pages={3072-3077}
}
Synthesis and Characterization of PPY-Au Nanocomposite
The study involves the synthesis of PPY and PPY based gold nanocomposite (PPY-Au-nanocomposite) by polymerization procedure. The UV-Visible analysis was carried to confirm the presence of gold
Advances in transparent polymer nanocomposites and their applications: A comprehensive review
ABSTRACT Polymer nanocomposites are materials that are prepared by incorporating nanoparticles into polymer matrices. In last few decades, polymer nanocomposites have been investigated extensively
Fabrication and properties of luminescence polymer composites with erbium/ytterbium oxides and gold nanoparticles
TLDR
Rare-earth-doped optical materials are important for light sources in optoelectronics, as well as for efficient optical amplification elements and other elements of photonics, and proper nanoparticles with defined parameters are fabricated for the development of optically transparent, luminescent polymer nanocomposite with low optical scattering.
Synthesizing erbium and ytterbium oxide nanoparticles and obtaining luminescent polymeric composites based on them
This paper presents the results of a study of methods of synthesizing erbium and ytterbium oxide nanoparticles, formed on the surface of silicon nanoparticles by low- and high-temperature methods of
Polymers-Metal Nanocomposites
This work deals about polymer-metal nano-composites. Polymers are utilized in the synthesis of metal nanoparticles, metal-nanofluids and thin film with metal nanoparticles. In these synthesis
Development and Study of Biocompatible Polyurethane-Based Polymer-Metallic Nanocomposites
TLDR
It was shown that the materials are non-toxic, the adhesion of microorganisms on their surface also could be varied by changing their composition, and the presented polymer nanocomposites with different compositions of monomer and the presence of nanoparticles in them are prospective material for a possible bio-application as it is biocompatible, not toxic.
A quantitative approach for studying the bioactivity of nanohydroxyapatite/gold composites.
TLDR
The prepared nanocomposites have promising potential in orthopedic and tissue engineering applications because of their high capacity and fast uptake for Ca and P, which form apatite.
...
1
2
...

References

SHOWING 1-10 OF 16 REFERENCES
Gold-Poly(methyl methacrylate) Nanocomposite Films for Plasmonic Biosensing Applications
Gold-poly(methyl methacrylate) nanocomposites are prepared by an in situ method, by irradiating spin-coated films containing the polymer and the gold precursor dissolved in acetone. The reduction of
Polymer Sol-Gel Synthesis of Hybrid Nanocomposites
The current state and main problems of polymer sol-gel synthesis as a method of the preparation of hybrid polymer-inorganic nanocomposites are analyzed. The general characterization of sol-gel
Routes to Nanoparticle-Polymer Superlattices
Nanoparticles can self-assemble into highly ordered two- and three-dimensional superlattices. For many practical applications these assemblies need to be integrated into polymeric matrices to provide
Holographic Composites with Gold Nanoparticles: Nanoparticles Promote Polymer Segregation
New nanocomposites containing functionalized acrylate monomers and Au nanoparticles (NPs, 1.5−3 nm core diameter, 1−2 wt %) have been developed for an all-optical fabrication of periodic bulk
Holographic recording in TiO2 nanoparticle-dispersed methacrylate photopolymer films
We demonstrate permanent holographic storage in the green with high diffraction efficiency and recording sensitivity in TiO2 nanoparticle-dispersed methacrylate photopolymer films. It is shown that
Optical Nanocomposites Based on High Nanoparticles Concentration and Its Holographic Application
TLDR
This is an open access chapter distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Molecular Approach to the Surface Potential Estimate of Thiolate-Modified Gold Nanoparticles
The electrophoretic mobility is measured by a photocorrelation spectroscopic method to derive a ζ-potential as a function of pH using gold nanoparticles with a well-defined surface. Since the Debye
Preferential Intercalation in Polymer-Clay Nanocomposites
When polymer-clay nanocomposites are prepared from a polymer of broad molecular mass distribution, the question arises whether the clay scavenges the low molecular mass fractions or prefers to
...
1
2
...