Corpus ID: 212530295

FRICTION AND WEAR BEHAVIOUR OF PTFE & ITS COMPOSITES IN WET CONDITIONS

@inproceedings{Patil2015FRICTIONAW,
  title={FRICTION AND WEAR BEHAVIOUR OF PTFE \& ITS COMPOSITES IN WET CONDITIONS},
  author={P. Patil and Prof E R Deore},
  year={2015}
}
In this work, the effects of velocity of sliding, load and sliding distance on friction and wear of PTFE composites with filler materials such as glass bronze and carbon are studied under wet conditions. The experimental work is performed on pin-on-disc apparatus in wet conditions (under the influence of water) and analysed with the help of Design-Expert software. Parameters are set for three different levels and in optimum possible combination by Taguchi experimentation design array. Wear rate… Expand

References

SHOWING 1-10 OF 16 REFERENCES
Wear Analysis of Polytetrafluoroethylene (PTFE) and it's Composites under Wet Conditions
In this paper, the effect of load, Velocity of sliding and sliding distance on friction and wear of materials made of Polytetrafluoroethylele (PTFE) and PTFE composites under wet condition withExpand
Sliding friction and wear behaviour of polytetrafluoroethylene and its composites under dry conditions
Abstract In this paper, we studied and explored the influence of test speed and load values on the friction and wear behaviour of pure polytetrafluoroethylene (PTFE), glass fibre reinforced (GFR) andExpand
Wear Analysis of Polytetrafluoroethylene and it ’ s Composites under Dry Conditions using Design-Expert
In this paper, the effects of load, velocity of sliding and sliding distance on sliding friction and sliding wear of polymer material made of polytetrafluoroethylene (PTFE) and PTFE composites withExpand
A study on the friction and wear behavior of PTFE filled with alumina nanoparticles
Abstract A solid lubricant composite material was made by compression molding PTFE and 40 nm alumina particles. Prior to compression molding the constituent powders were blended using a jet millingExpand
Tribological properties of transfer films of PTFE-based composites
PTFE-based composites containing 15 vol.% MoS2, graphite, aluminum and bronze powder, were respectively prepared by compression molding at room temperature and subsequent heat treatment inExpand
The tribological behaviour of glass filled polytetrafluoroethylene
Abstract Polymers and polymer composites are steadily gaining ground over metals in the field of engineering applications in tribology. Laboratory wear tests were carried out under ambientExpand
Sliding wear behavior of PTFE composites
The tribological behavior of polytetrafluroethylene (PTFE) and PTFE composites with filler materials such as carbon, graphite, E glass fibers, MoS 2 and poly-p-phenyleneterephthalamide (PPDT) fibers,Expand
Friction and Wear of Polymer Composites Filled by NanoParticles : A Review
Composites formed by adding nano-scale particles to a polymer matrix results in improving electrical, mechanical, and thermal properties of the composite. Good tribological properties can be obtainedExpand
Friction and Wear of Polymer Composites Filled by Nano-Particles: A Review
Composites formed by adding nano-scale particles to a polymer matrix results in improving electrical, mechanical, and thermal properties of the composite. Good tribological properties can be obtainedExpand
...
1
2
...