Corpus ID: 208651226

Evaluation of peel bond strength between plexiglas acrylic (pmma) and maxillofacial silicone using three different primers

@inproceedings{Tanveer2018EvaluationOP,
  title={Evaluation of peel bond strength between plexiglas acrylic (pmma) and maxillofacial silicone using three different primers},
  author={Waqas Tanveer and A. Wonglamsam and S. Tancharoen and Arunee Tirasriwat and T. Srithavaj and Binit Shrestha and Natdhanai Chotprasert},
  year={2018}
}
Objective: The bonding of maxillofacial silicone to acrylic resin is a critical issue when rehabilitating with implants retained maxillofacial prosthesis. The aim of this study was to evaluate 180 ̊ peel bond strength between prefabricated Plexiglas acrylic and maxillofacial silicone by using three different primers. Material and Methods: The peel bond strength between maxillofacial silicone, A-2186 and Plexiglas acrylic resin was assessed by using three different primers (A-306, A-304 and A… Expand

Figures and Tables from this paper

References

SHOWING 1-10 OF 34 REFERENCES
Bonding of maxillofacial silicone elastomers to an acrylic substrate.
  • M. Hatamleh, D. Watts
  • Materials Science, Medicine
  • Dental materials : official publication of the Academy of Dental Materials
  • 2010
TLDR
Shear and peel test-regimes were both relevant and suitable for studying bonding and debonding characteristics of maxillofacial silicone elastomers bonded to an autopolymerising acrylic resin. Expand
Effect of different primers on the peel bond strength between silicone elastomer and acrylic resins.
Introduction: Implant-supported extra-oral prostheses often require a retentive matrix to hold gold alloy clips and magnets, which act as retentive means. Silicone elastomers have a differentExpand
Evaluation of bonding efficiency between facial silicone and acrylic resin using different bonding agents and surface alterations
TLDR
Retentive holes made on acrylic surface increased the bond strength considerably as compared to retentive beads and samples without any surface characterization, and A-330G primer was more compatible withCosmesil M511 silicone and has better bonding of Cosmesil to acrylic resin. Expand
Bonding of silicone prosthetic elastomers to three different denture resins.
TLDR
Cosmesil condensation-type silicone always showed higher bond strength with the three different types of denture resins compared to Ideal addition silicone, keeping other variables associated with the silicone-resin bond fixed. Expand
Bonding of silicone extra-oral elastomers to acrylic resin: the effect of primer composition.
TLDR
The results obtained in this work led to the conclusion that the most critical parameter allowing the efficient performance of a primer is the compatibility and affinity of its composition with the selected silicone elastomer. Expand
The effects of primers and surface bonding characteristics on the adhesion of polyurethane to two commonly used silicone elastomers.
TLDR
Based on T-peel strength, peel distance, and peak load data, the combination of silicone A-2000 and Sofreliner MS primer resulted in the greatest mean bond strength for silicone-to-polyurethane applications. Expand
Effect of surface treatment on the bonding of an autopolymerizing soft denture liner to a denture base resin.
TLDR
Air abrasion on the denture base resin surface was not effective in enhancing failure load, and Cyclic thermal stress is one factor degrading the bond between soft denture liner and acrylic resin dentures base. Expand
Evaluation of bond strength of soft relining materials to denture base polymers.
  • M. Mutluay, I. E. Ruyter
  • Materials Science, Medicine
  • Dental materials : official publication of the Academy of Dental Materials
  • 2007
TLDR
A wide variety of newly formulated soft liners used in this study gave comparable or better bond strength results compared to Molloplast B. Expand
Fibre reinforcement enhances bonding of soft lining to acrylic dental and maxillofacial prostheses.
  • M. Hatamleh, D. Watts
  • Materials Science, Medicine
  • The European journal of prosthodontics and restorative dentistry
  • 2008
TLDR
StickTech Net fibre-reinforced surfaces exhibited stronger bond to Molloplast-B over non- reinforced interfaces, indicating promising clinical implications. Expand
Evaluation of adhesive properties of three resilient denture liners by the modified peel test method.
TLDR
The modified peel test is effective for evaluating the adhesion between denture base material and a resilient denture liner, and large differences for ES and US, but not for S. Expand
...
1
2
3
4
...