Evaluation of flow hydrodynamics in a pilot-scale dissolved air flotation tank: a comparison between CFD and experimental measurements.
@article{Lakghomi2015EvaluationOF,
title={Evaluation of flow hydrodynamics in a pilot-scale dissolved air flotation tank: a comparison between CFD and experimental measurements.},
author={Babak Lakghomi and Yuri A. Lawryshyn and Ron Hofmann},
journal={Water science and technology : a journal of the International Association on Water Pollution Research},
year={2015},
volume={72 7},
pages={
1111-8
}
}Computational fluid dynamics (CFD) models of dissolved air flotation (DAF) have shown formation of stratified flow (back and forth horizontal flow layers at the top of the separation zone) and its impact on improved DAF efficiency. However, there has been a lack of experimental validation of CFD predictions, especially in the presence of solid particles. In this work, for the first time, both two-phase (air-water) and three-phase (air-water-solid particles) CFD models were evaluated at pilot…
10 Citations
Effects of internal geometry on hydrodynamics of dissolved air flotation (DAF) tank: An experimental study using particle image velocimetry (PIV)
- Materials Science, PhysicsColloids and Surfaces A: Physicochemical and Engineering Aspects
- 2019
Research on CFD numerical simulation and flow field characteristics of countercurrent-cocurrent dissolved air flotation.
- Materials Science, EngineeringWater science and technology : a journal of the International Association on Water Pollution Research
- 2018
In this study, computational fluid dynamics (CFD) numerical simulation was employed to confirm that the unique CCDAF configuration create reasonable flotation conditions and that the flow field characteristics were good no matter for single phase or gas-liquid two-phase conditions.
Hydrodynamic study of a phosphate flotation cell by CFD approach
- Materials ScienceChemical Engineering and Processing - Process Intensification
- 2019
Three-dimensional simulation of a secondary circular settling tank: flow pattern and sedimentation process
- EngineeringBrazilian Journal of Chemical Engineering
- 2020
A secondary circular settling tank (SCST) with low hydraulic load was numerically analyzed. A transient, three-dimensional model was employed to evaluate flow in a pilot plant. Three phases were…
Effect of salinity on air dissolution, size distribution of microbubbles, and hydrodynamics of a dissolved air flotation (DAF) system
- Engineering
- 2020
Hydrodynamic aspects of flotation separation
- Materials Science
- 2016
Abstract Flotation separation is mainly used for removing particulates from aqueous dispersions. It is widely used for ore beneficiation and recovering valuable materials. This paper reviews the…
In situ characterisation of size distribution and rise velocity of microbubbles by high-speed photography
- Physics
- 2020
Bubble-Particle Collision Efficiency in Rotating Dissolved Air Flotation in Paper-Recycling Wastewater Treatment: Experiments and Modeling
- Materials Science, Engineering
- 2022
Paper-recycling mills are serious environmental threats due to their high consumption of water and highly polluted wastewater. Particles are the most common issue of paper-recycling wastewater, and…
References
SHOWING 1-10 OF 22 REFERENCES
CFD Model for the Design of Large Scale Flotation Tanks for Water and Wastewater Treatment
- Materials Science, Engineering
- 2007
A CFD model incorporating flotation kinetic expressions is developed to simulate the performance of flotation tanks utilized in water and wastewater treatment plants. The focus here is on tanks that…
Small scale model for CFD validation in DAF application.
- EngineeringWater science and technology : a journal of the International Association on Water Pollution Research
- 2001
The Perspex model used in this study allows the use of laser Doppler velocimetry (LDV), a non-invasive, high-resolution laser technique of flow velocity measurement, which will be used to verify two-phase computational fluid dynamics (CFD) models of DAF.
Importance of flow stratification and bubble aggregation in the separation zone of a dissolved air flotation tank.
- Engineering, Materials ScienceWater research
- 2012
Residence Time Distribution Characterization of the Flow Structure in Dissolved Air Flotation
- Environmental Science
- 2005
A numerical and analytical investigation is performed on a dissolved air flotation (DAF) pilot tank by using the residence time distribution (RTD) of the conservative dye rhodamine measured with a…
A model of particle removal in a dissolved air flotation tank: importance of stratified flow and bubble size.
- Materials Science, EngineeringWater research
- 2015
The flow structure in the separation zone of a DAF pilot plant and the relation with bubble concentration.
- Environmental ScienceWater science and technology : a journal of the International Association on Water Pollution Research
- 2001
The paper is a presentation of experimental studies on velocity and air-content profiles in a DAF pilot plant, indicating a separation of the water body in two layers with a distinct boundary.
Modelling the global efficiency of dissolved air flotation.
- Materials ScienceWater science and technology : a journal of the International Association on Water Pollution Research
- 2001
It is found that flotation, in general, is enhanced by the use of larger particles and larger bubbles, and bubble size will have to be increased by a factor of two over the size currently employed in many facilities during dissolved air flotation.
Bubble size distribution in dissolved air flotation tanks
- Materials Science
- 2004
This papers presents the results of two studies performed to measure the size distribution of bubbles at different locations in dissolved air flotation tanks. Measurements were performed at the…
Collision efficiency factor of bubble and particle (alpha bp) in DAF: theory and experimental verification.
- Materials ScienceWater science and technology : a journal of the International Association on Water Pollution Research
- 2001
Whether pretreatment is important and why slight coagulant overdosing and shorter flocculation times are generally preferred in DAF are examined, both current accepted practice and current practices are explained.
Dissolved air flotation modelling: insights and shortcomings
- Materials Science
- 2004
The use of relatively simple but conceptually sound mathematical models is a powerful tool to identify and understand variables that affect the performance of a process. Such models have been used to…





