Evaluation of a glass-ceramic coating for machine tool slides

@article{Sen1989EvaluationOA,
  title={Evaluation of a glass-ceramic coating for machine tool slides},
  author={R. Sen and S. Dutta and S. Das and S. K. Basu},
  journal={Wear},
  year={1989},
  volume={130},
  pages={249-260}
}
With a view to protect steel against mechanical wear and tear under dry sliding conditions, a glass-ceramic coating of composition RO-R′2O-Al2O3-SiO2 (R = Ca, Mg; R′ = Na, K, Li), with TiO2 and P2O5 as nucleation agents, has been applied on steel samples and their performances studied. The method of application of the glass-ceramic coating on steel is also discussed. Wear data have been fed for analysis of variance at 1% and 5% levels of significance and a normal factorial regression has been… Expand
A New High Temperature Resistant Glass-Ceramic Coating Developed in CGCRI, Kolkata
A new high temperature and abrasion resistant glass-ceramic coating system (based on MgO-Al2O]-TiO2 and ZnO-Al2O3-SiO2 based glass systems) for gas turbine engine components has been developed.Expand
A new high temperature resistant glass-ceramic coating for gas turbine engine components
A new high temperature and abrasion resistant glass-ceramic coating system (based on MgO-Al2O3-TiO2 and ZnO-Al2O3-SiO2 based glass systems) for gas turbine engine components has been developed.Expand
Glass and glass-ceramic coatings, versatile materials for industrial and engineering applications
Among various coating systems for industrial and engineering applications, glass and glass-ceramic coatings have advantages of chemical inertness, high temperature stability and superior mechanicalExpand
Vitreous Enamel Coating on Mild Steel Substrate: Characterization and Evaluation
Vitreous enamel plays an important role in the coating production process in steel-enamel interfaces. In this study a new technology process has been formulated by improved coatings rather than theExpand
Application of design of experiment on electrophoretic deposition of glass-ceramic coating materials from an aqueous bath
A process for application of abrasion- or corrosion-resistant glass-ceramic coating materials on metal substrate by electrophoretic deposition technique in an aqueous medium has been described. TheExpand
Mechanical, surface morphological and multi-objective optimization of tribological properties of V2O5 doped lead calcium titanate borosilicate glass ceramics
Abstract In the 55[(PbxCa1−x).OTiO2]-44[2SiO2.B2O3]-1V2O5 system, various experimental studies were performed to obtain the mechanical and tribological properties of synthesized glass ceramics (GCs).Expand
Studies on broad spectrum corrosion resistant oxide coatings
The corrosion resistant oxide coatings, developed and applied by the conventional vitreous enamelling techniques, showed superior resistance to a range of mineral acids at various strengths andExpand
Abrasion of Human Enamel by Different Dental Ceramics in vitro
TLDR
Dicor and Dicor coated with a shading porcelain were found to cause the lowest wear of enamel, and Knoop hardness showed poor correlation with the results of the abrasive testing. Expand
Modulation of Lithium Disilicate Translucency through Heat Treatment
TLDR
The results suggest that the translucency of ceramics can be modified through thermal refinement under two conditions: the particle size of the ceramic is small enough to achieve minimal grain-boundary light scattering and the percentage of particles allowing visible light transmission is altered by the heat treatment. Expand
Finite element analysis of frictional contact of elastic solids with thin and moderately thick coatings
The frictional contact of elastic solids with thin and moderately thick coatings is analysed by using the finite element method. It is assumed that 2 elastic, homogeneous substrates with elasticExpand

References

SHOWING 1-3 OF 3 REFERENCES
Wear analysis of plastic guides used in machine tools
Abstract An investigation of the influence of various factors affecting the wear resistance of plastic guides mated with a cast iron bed plate under dry and controlled conditions to establish byExpand
Experimental designs, 2nd ed.
Experimental Designs, 2nd Edition