Evaluation Of Inside Heat TransferCoefficient of Roll Bond Evaporator for RoomAir Conditioner

@article{Ravi2015EvaluationOI,
  title={Evaluation Of Inside Heat TransferCoefficient of Roll Bond Evaporator for RoomAir Conditioner},
  author={P. S. Ravi and Arkanti Krishnaiah and Suresh Akella and Md. Azizuddin},
  journal={International Journal of Innovative Research in Science, Engineering and Technology},
  year={2015},
  volume={4},
  pages={3378-3384}
}
  • P. Ravi, A. Krishnaiah, +1 author M. Azizuddin
  • Published 11 July 2015
  • Materials Science
  • International Journal of Innovative Research in Science, Engineering and Technology
In all refrigeration and air conditioning equipment the evaporator is either a plate and fin evaporator, tube and fin or a plate and tubular evaporator. There were little changes in manufacturing methods and geometry. This paper presents a new design of evaporator, in which roll bond evaporator is used in room air conditioner. Presently the use of roll bond evaporator is limited to domestic refrigerators only. The study throws light on evaluating the inside heat transfer coefficient… Expand

Figures from this paper

Design of Roll Bond Evaporator for Room Air Conditioner
Every refrigeration and air conditioning appliance uses an evaporator as a heat exchanger device which gives the desired cooling effect. Tube and fin type evaporators are more commonly used in airExpand
Design and Experimentation of Roll Bond Evaporator for Room Air Conditioner with R-22 as Refrigerant
The world is looking towards producing products which consume less power without compromising on quality of life. The increase in use of refrigeration and air conditioning appliances are contributingExpand
Flow and Thermal Analysis of Mobile Air Conditioning by Using Roll Bond Evaporator
In modern world use of refrigeration and air conditioning systems is on rise. Room air conditioners are very common in comfort air conditioning system. Room air conditioners may be of window type orExpand
Display Water Cooler
Industries, colleges, restaurants, etc., includes canteens which use refrigerators, water coolers and air conditioners to generate heat during the process of refrigeration. This heat energy isExpand
INTEGRATION OF TALUM’S ROLL-BOND HEAT EXCHANGER FOR DIFFERENT APPLICATIONS INTEGRACIJA TALUMOVIH TOPLOTNIH PRENOSNIKOV, IZDELANIH PO POSTOPKU PLATINIRANEGA VALJANJA ZA RAZLIČNE APLIKACIJE
This article presents the integration of heat exchangers made using the roll-bond technology of Talum d.d., Kidričevo, Slovenia, to applications in refrigeration and heating technology. Talum hasExpand
Analysis of Heating Effects and Deformations for a STAF Panel with a Coupled CFD and FEM Simulation Method
Conventional sandwich panels are one of the cheapest and easiest solutions for forming the thermal building envelope of industrial buildings. They are pre-fabricated facade elements, of whichExpand

References

SHOWING 1-3 OF 3 REFERENCES
A numerical simulation model for plate-type, roll-bond evaporators
Abstract This study presents a first-principles mathematical model developed to investigate the thermal behavior of a plate-type, roll-bond evaporator. The refrigerated cabinet was also taken intoExpand
An improved refrigerating container and a process for manufacturing the same
  • European Patent Specification : EP No 1016838A1,
  • 1998
Energy optimization of Refrigeration systems: The Domestic Refrigerator – A case study, Ph.D Thesis
  • 1995