Enhanced Low-Speed Operations for Sensorless Anisotropic PM Synchronous Motor Drives by a Modified Back-EMF Observer

@article{Antonello2018EnhancedLO,
  title={Enhanced Low-Speed Operations for Sensorless Anisotropic PM Synchronous Motor Drives by a Modified Back-EMF Observer},
  author={R. Antonello and L. Ortombina and F. Tinazzi and M. Zigliotto},
  journal={IEEE Transactions on Industrial Electronics},
  year={2018},
  volume={65},
  pages={3069-3076}
}
  • R. Antonello, L. Ortombina, +1 author M. Zigliotto
  • Published 2018
  • Computer Science
  • IEEE Transactions on Industrial Electronics
    • The high-frequency signals normally used for sensorless operations in anisotropic permanent-magnet synchronous motors cause unwanted torque ripple, noise, and vibrations. The target of the present research is to extend downwards the speed range in which the sensorless drive can work without any signal injection. Specifically, this paper proposes a new back-electromotive force observer that eliminates the instability that may arise in conventional observers when the motor drive operates in… CONTINUE READING
    View on IEEE
    doi.org
    27 Citations
    Highly Influencial Citations
    1
    Background Citations
    9
    Methods Citations
    5
    Results Citations
    1

    Figures, Tables, and Topics from this paper

    Figures and Tables

    Explore Further: Topics Discussed in This Paper

    27 Citations
    Citation Type

    Citation Type

    Position Sensorless Permanent Magnet Synchronous Machine Drives—A Review
    • 12
    Application of Phase-Locked Loop in Sensorless SynRM Drives
    Performance Evaluation of CKF Based Sensorless Vector Controlled PM Synchronous Motor Drive
    An Effective Ellipse Fitting Technique of the Current Response Locus to Rotating HF Voltage Injection in IPMSM for Sensorless Rotor Position Estimation
    • 3
    Synchronous Reluctance Motor Parameter and State Estimation Using Extended Kalman Filter and Current Derivative Measurement
    • 3
    • PDF
    A Hardware-in-the-Loop Realization of Speed Sensorless Control of PMa-SynRM With Steady-State and Transient Performances Enhancement
    • 2
    A Hardware-in-the-Loop Realization of Speed Sensorless Control of PMa-SynRM with Steady-State and Transient Performances Enhancement
    • M. Amin, G. A. Aziz
    • Computer Science
    • 2018 IEEE Industry Applications Society Annual Meeting (IAS)
    • 2018
    • 2
    Interpolated Position Control for Permanent Magnet Synchronous Machines at Low Speed Region
    • Highly Influenced
    Driving Control Technologies of New High-Efficient Motors
    • PDF
    Implementation of a novel and versatile initial rotor position estimation method on surface-mounted permanent magnet synchronous motor prototype at zero speed

    References

    SHOWING 1-10 OF 24 REFERENCES
    Enhanced low-speed operations of back EMF-based sensorless anisotropic PMSM drives
    • 4
    An extended electromotive force model for sensorless control of interior permanent-magnet synchronous motors
    • 512
    Carrier Signal Selection for Sensorless Control of PM Synchronous Machines at Zero and Very Low Speeds
    • 156
    Sensorless Control of Salient PMSM Drives in the Transition Region
    • 96
    Sensorless Capability of Fractional-Slot Surface-Mounted PM Motors
    • 35
    A High-Speed Sliding-Mode Observer for the Sensorless Speed Control of a PMSM
    • 400
    • PDF
    Evaluating the practical low speed limits for back-EMF tracking-based sensorless speed control using drive stiffness as a key metric
    • 96
    • Highly Influential
    Sensorless Control of PMSM Fractional Horsepower Drives by Signal Injection and Neural Adaptive-Band Filtering
    • 75
    Performance Improvement of Sensorless IPMSM Drives in a Low-Speed Region Using Online Parameter Identification
    • 91
    Effectiveness of Voltage Error Compensation and Parameter Identification for Model-Based Sensorless Control of IPMSM
    • 79