Energy neutral design of an IoT system for pollution monitoring

@article{Rossi2017EnergyND,
  title={Energy neutral design of an IoT system for pollution monitoring},
  author={Maurizio Rossi and Pietro Tosato},
  journal={2017 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems (EESMS)},
  year={2017},
  pages={1-6}
}
  • M. Rossi, Pietro Tosato
  • Published 24 July 2017
  • Computer Science
  • 2017 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems (EESMS)
A lot of research and studies have shown the impact of pollution on health, and a lot of regulation are in action in the European Union and other countries around the world defining the allowed concentration levels of volatile chemicals. Standard measurements equipment are very expensive, and static large stations require space and high power consumption, thus are not suitable to realize portable equipment nor to seamlessly be integrated in Smart Cities. In this paper we present the design and… 

A Low Power IoT Sensor Node Architecture for Waste Management Within Smart Cities Context

TLDR
The paper analyzes in detail the node architecture, focusing on the energy saving technologies and policies, with the purpose of extending the batteries lifetime by reducing power consumption, through hardware and software optimization.

A Low Cost Outdoor Air Pollution Monitoring Device With Power Controlled Built-In PM Sensor

Recent advances in wireless communication technology and the Internet of Things (IoT) have provided an opportunity for mass deployment of low cost sensor nodes to measure air pollution in real-time

IoT Enabled Low Cost Air Quality Sensor

TLDR
A novel low cost sensor node that utilizes cost-effective electrochemical sensors to measure Carbon Monoxide (CO) and Nitrogen Dioxide (NO2) concentrations and an infrared sensor to measure Particulate Matter (PM) levels is developed.

A Study of Air Pollution Smart Sensors LPWAN via NB-IoT for Thailand Smart Cities 4.0

TLDR
Smart sensors of air pollution that consist of particulate matter or dust sensor, carbon monoxide, carbon dioxide, CO2, noise level, and ozone respectively are proposed to monitor the air quality in smart city.

Low Cost Sensor With IoT LoRaWAN Connectivity and Machine Learning-Based Calibration for Air Pollution Monitoring

TLDR
A novel low-cost sensor node that utilizes cost-effective electrochemical sensors to measure carbon monoxide (CO) and nitrogen dioxide (NO2) concentrations and an infrared sensor to measure particulate matter (PM) levels is developed.

Effect of Event-Based Sensing on IoT Node Power Efficiency. Case Study: Air Quality Monitoring in Smart Cities

TLDR
It is concluded that event-based sensing techniques can yield up to 50% savings in sensor node consumption compared to classical periodic sensing techniques.

A Development on Air Pollution Detection Sensors based on NB-IoT Network for Smart Cities

TLDR
A development of air pollution detection sensors and monitoring for smart city, Thailand 4.0 is presented and it is found that the AQI level of measured location is good air quality.

A Review of Energy Harvesting Techniques for Low Power Wide Area Networks (LPWANs)

TLDR
The aim of this survey paper is to provide a detailed overview of the the existing LPWAN systems relying on energy harvesting for their powering, and, for each technology, the applied energy harvesting techniques will be described as well as the architecture of the power management units when present.

A Comprehensive Study of the Use of LoRa in the Development of Smart Cities

TLDR
The intention of this work is to identify the technological or practical barriers that hamper the development of solutions, find possible future trends that could exist in the context of smart cities and IoT, and understand how they could be exploited by the industry and academy.

References

SHOWING 1-10 OF 19 REFERENCES

Enhancing lifetime of WSN for natural gas leakages detection

ekoNET - Environmental Monitoring Using Low-Cost Sensors for Detecting Gases, Particulate Matter, and Meteorological Parameters

TLDR
An overview of the system architecture is given, encompassing the ekoNET device, back-end cloud infrastructure, data handling and visualization engine as well as the application-level components and modules, enabling the overall system operation performance testing.

A self sustainable air quality monitoring system using WSN

TLDR
This paper proposes a self-sustainable air quality monitoring system based on the WSN technology to collect air quality parameters in an urban area that combines a solar cell and a lead-acid battery as its power supply devices, so the system has the long-tern monitoring capability.

Self-Powered WSN for Distributed Data Center Monitoring

TLDR
The design and the characterization of an energy neutral embedded wireless system, prototyped to monitor perpetually environmental parameters in servers and racks, based on an energy harvesting module based on Thermoelectric Generators.

Energy consumption and air quality monitoring system

TLDR
This paper describes a basic idea of energy consumption and indoor air quality monitoring system developed as a part of the Finnish AsTEKa-project and the first prototype of this monitoring system was presented in the Kuopio housing fair 2010.

POVOMON: An Ad-hoc Wireless Sensor Network for indoor environmental monitoring

TLDR
Preliminary laboratory tests and data sets collected show that the ad-hoc WSN deployment for indoor environmental quality monitoring in office buildings provides an accurate monitoring of indoor environmental parameters delivering high data reliability with an estimated lifetime exceeding 1.5 years, without the gas sensors.

Flora Health Wireless Monitoring with Plant-Microbial Fuel Cell

Long range wireless sensing powered by plant-microbial fuel cell

TLDR
Experimental results show that the proposed system paves the way to energy neutral sensors powered by biosystems available almost anywhere on Earth.

Investigating the use of commodity dust sensors for the embedded measurement of particulate matter

TLDR
This research investigates the feasibility of particulate matter measurements using cheap, commodity dust sensors which are small enough to be incorporated into mobile devices, and discusses application scenarios which would benefit from inexpensive methods to assess the particulates matter load.

Laboratory Evaluation and Calibration of Three Low-Cost Particle Sensors for Particulate Matter Measurement

Particle sensors offer significant advantages of compact size and low cost, and have recently drawn great attention for usage as portable monitors measuring particulate matter mass concentrations.