Energy Harvesting With Single-Sided Linear Induction Machines Featuring Secondary Conductive Coating

@article{Flankl2019EnergyHW,
  title={Energy Harvesting With Single-Sided Linear Induction Machines Featuring Secondary Conductive Coating},
  author={Michael Flankl and Lucas de Oliveira Baumann and Arda T{\"u}ys{\"u}z and Johann Walter Kolar},
  journal={IEEE Transactions on Industrial Electronics},
  year={2019},
  volume={66},
  pages={4880-4890}
}
With the continuously broadening application area of Internet of Things (IoT), robust energy harvesters and power conditioning units for supplying remote sensors and actuators are gaining importance. A single-sided linear induction machine (SLIM) with solid secondary operating in generator mode could meet these requirements as it can harvest electric energy from the kinetic energy of a moving conductive body (secondary). Therefore, the energy harvesting performance of SLIMs is studied in this… Expand
Analysis of a Linear Induction Motor with Solid Iron Secondary
Background and Objectives: Linear induction motors (LIMs) are widely employed in rail transportation systems due to their robust, simple and low cost structure.  Methods: Several methods haveExpand
Non‐invasive KERS‐based auxiliary energy supply system for freight trains
TLDR
A non-invasive auxiliary energy supply system with 22 W/dm 3 (360 mW/in 3 ) based on a non-coaxial eddy-current coupling is described and analysed in this study. Expand
Experimental Analysis and Optimization of a Contactless Eddy-Current-Based Speed Sensor for Smooth Conductive Surfaces
TLDR
A contactless, eddy-current-based speed sensor is proposed for applications where the speed of a smooth conductive surface is to be measured; but contact to or modification of this target surface is prohibited. Expand
Design and Analysis of a Self-Holding Three-Position Electric Tubular Actuator
TLDR
The article proposes a relatively fast and simple approach for the SHTPETA design process based on the required forces and moved distance. Expand
Design and Performance Evaluation of a Modular Linear Induction Machine for Rotating Electronic Billboard
TLDR
A rotating electronic billboard (REB) to save the cost of space required for its installation and a modular linear induction machine (M-LIM) to rotate the proposed REB is proposed and the results show good agreement with the simulation. Expand
ReView by River Valley Technologies IET Electrical Systems in Transportation 2019 / 01 / 28 12 : 05 : 11 IET
Freight wagons typically do not have an electrical train supply (ETS) and state-of-the-art auxiliary energy generation systems as e.g. axle generators on freight wagons lack the possibility for aExpand
Prospects and Challenges of the Hyperloop Transportation System: A Systematic Technology Review
TLDR
The present article outlines the core technologies needed to realize the Hyperloop transportation system (HTS) and aims to open up the discussion, provide a sufficient understanding of theHyperloop field’s multidisciplinary aspects, and establish a foundation for further investigations. Expand

References

SHOWING 1-10 OF 40 REFERENCES
Analysis and power scaling of a single-sided linear induction machine for energy harvesting
  • M. Flankl, A. Tuysuz, J. Kolar
  • Engineering, Computer Science
  • IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society
  • 2015
TLDR
A power scaling law as function of the geometric parameters and stator current is derived and is an effective tool for estimating the performance of a SLIM for contactless energy harvesting in emerging industry and consumer applications. Expand
Novel contactless axial-flux permanent-magnet electromechanical energy harvester
This paper proposes a novel type of watt-range permanent-magnet energy harvester, which harvests energy from a moving conductive body or surface without mechanical contact, as its operation is purelyExpand
A Novel High-Performance Energy Harvester Based on Nonlinear Resonance for Scavenging Power-Frequency Magnetic Energy
TLDR
A novel magnetic energy harvester based on nonlinear resonance is presented, which has been verified to be capable of scavenging energy from the power-frequency magnetic field distributed around the transmission line. Expand
Dual-Source Self-Start High-Efficiency Microscale Smart Energy Harvesting System for IoT
TLDR
A low-power batteryless energy harvesting system for Internet of Things (IoT) applications that includes a smart control to adaptively adjust the number of sensors at the load, leading to better usage of the available energy at any given time. Expand
Cogging Torque Shape Optimization of an Integrated Generator for Electromechanical Energy Harvesting
TLDR
An approach for shaping the stator geometry of a permanent-magnet (PM) synchronous machine, such that an arbitrary CT pattern can be obtained by an iterative algorithm, which adds sinusoidal air gap modulation components on an initial machine geometry. Expand
Kinetic Energy Harvesting Using Piezoelectric and Electromagnetic Technologies—State of the Art
This paper presents the latest progress in kinetic energy harvesting for wide applications ranging from implanted devices and wearable electronic devices to mobile electronics and self-poweredExpand
Equivalent circuits for single-sided linear induction motors
Single-sided linear induction motors (SLIMs) have lately been applied in transportation system traction drives, especially in the intermediate speed range. They have merits such as the ability toExpand
Energy Harvesting From Hybrid Indoor Ambient Light and Thermal Energy Sources for Enhanced Performance of Wireless Sensor Nodes
  • Y. Tan, S. K. Panda
  • Engineering, Computer Science
  • IEEE Transactions on Industrial Electronics
  • 2011
In this paper, a hybrid of indoor ambient light and thermal energy harvesting scheme that uses only one power management circuit to condition the combined output power harvested from both energyExpand
Electromagnetic optimal design of a linear induction motor in linear metro
An improved T-model equivalent circuit of a single-sided linear induction machine (SLIM) is proposed. The analysis utilizes a set of one-dimensional air gap flux linkage equations. The model takesExpand
Impact of iron dust on electromechanical systems: A case study
Several actuators (e.g. permanent magnet (PM) machines, magnet valves), sensors (e.g. reed sensors, Hall sensors, inductive proximity switches) and emerging inductive energy harvesting systems relyExpand
...
1
2
3
4
...