Electronic structure, structural and optical properties of thermally evaporated CdTe thin films

  title={Electronic structure, structural and optical properties of thermally evaporated CdTe thin films},
  author={S. Lalitha and Smagul Zh. Karazhanov and Ponniah Ravindran and S. Senthilarasu and Ramakrishnan Sathyamoorthy and J. Janabergenov},
  journal={Physica B-condensed Matter},

Investigations on Structural, Electrical and Optical Properties of Polycrystalline CdInTe Thin Films Grown by Thermal Evaporation

In this study, properties of thermally evaporated polycrystalline CdInTe thin films were investigated. The surface morphology, composition and crystal structure of the films were determined by means

Analytical and Experimental Study of Structural and optical properties of thermally evaporated CdTe thin films

CdTe Thin films were deposited on glass substrates by thermal evaporation method. The geometric thickness was calculated using interferometric method based on reflectance curve recorded with the

Effect of Substrate Temperature on the Structural and Optical Properties of CdTe Films Prepared by Thermal Evaporation

CdTe thin films are prepared on corning 1,737 glass using simple thermal evaporation technique at three different substrate temperatures, viz., room temperature, 100 and 200 °C. The dependence of the

Structural and Thermodynamic Properties of Pb-Cd-Te Thin Films: Experimental Study and DFT Analysis

Vacuum evaporation technology was applied to fabricate Pb0.9Cd0.1Te:Pb (3 at.%) thin films on glass and polycrystalline silicon substrates. X-ray diffraction analysis confirms the rock salt structure


Thin films of CdTe have been obtained by electrodeposition in the presence of tartaric acid on fluorinedoped tin oxide (FTO)-coated glass substrates, under a constant voltage of 1.40 V. In order to

Structural, optical, photoluminescence, dielectric and electrical studies of vacuum-evaporated CdTe thin films

Highly-oriented CdTe thin films were fabricated on quartz and glass substrates by thermal evaporation technique in the vacuum of about 2 × 10 − 5 torr. The CdTe thin films were characterized by X-ray

Influence of thermal annealing on CdTe thin film deposited by thermal evaporation technique

  • K. S. RahmanF. Haque N. Amin
  • Physics, Materials Science
    2014 3rd International Conference on the Developments in Renewable Energy Technology (ICDRET)
  • 2014
Effects of thermal annealing on the structural and optical properties of thermally evaporated CdTe thin films are presented here. Thin films of CdTe were deposited on soda lime glass substrates at



Effect of Substrate Temperature on the Photovoltaic Properties of a CdS/CdTe Solar Cell

Structural and electrical properties of CdTe thin films prepared by the conventional vacuum evaporation method were studied. Photovoltaic properties of thin-film CdS

Preparation and characterization of CdTe thin films deposited by CSS

CdTe polycrystalline thin films were grown using a new procedure based on the CSS technique. With an adequate control of the deposition parameters, it was possible to grow CdTe films with grain sizes