Electromagnetic interference shielding in 1-18 GHz frequency and electrical property correlations in poly(vinylidene fluoride)-multi-walled carbon nanotube composites.

@article{Kumar2015ElectromagneticIS,
  title={Electromagnetic interference shielding in 1-18 GHz frequency and electrical property correlations in poly(vinylidene fluoride)-multi-walled carbon nanotube composites.},
  author={G. Sudheer Kumar and D. Vishnupriya and Anupam Joshi and Suwarna Datar and T. Umasankar Patro},
  journal={Physical chemistry chemical physics : PCCP},
  year={2015},
  volume={17 31},
  pages={
          20347-60
        }
}
Electromagnetic interference (EMI) shielding properties in the 1-18 GHz frequency range for multi-walled carbon nanotube (MWNT)-poly(vinylidene fluoride) (PVDF) composites are reported. A simple and gentle acid-treatment of MWNT showed a percolation threshold (PT) of 0.15 wt% in the PVDF matrix as against 0.35 wt% for unfunctionalized MWNT. Acid-treatment of MWNT significantly improves dispersion, interfacial adhesion with the matrix and the EMI shielding properties of PVDF composites. Further… 
Fabrication and evaluation of thin layer PVDF composites using MWCNT reinforcement: Mechanical, electrical and enhanced electromagnetic interference shielding properties
Radar X-band electromagnetic interference shielding (EMS) is one of the prime requirements for any air vehicle coating; with limitations on the balance between strength and thickness of the EMS
Electromagnetic shielding and mechanical properties of thermally stable poly(ether ketone)/multi-walled carbon nanotube composites prepared using a twin-screw extruder equipped with novel fractional mixing elements
In the current study, a twin screw extruder equipped with novel fractional mixing elements [FME] (for enhanced mixing) was used to prepare a thermally stable, mechanically strong and light weight
High electromagnetic interference shielding of poly(ether-sulfone)/multiwalled carbon nanotube nanocomposites fabricated by eco-friendly route.
High performance polymer matrix nanocomposites based on poly(ether-sulfone) (PES) as matrix and multiwalled carbon nanotube (MWCNT) as reinforcement were fabricated using planetary ball mill followed
Enhanced Electromagnetic Interference Shielding in a Au–MWCNT Composite Nanostructure Dispersed PVDF Thin Films
Electromagnetic interference (EMI) shielding effectiveness and conductivities in a flexible conducting polymer composite film, prepared via a simple solvent cast method, of PVDF incorporated with
Development of polyvinylidene fluoride–graphite composites as an alternate material for electromagnetic shielding applications
Polyvinylidene fluoride (PVDF)-graphite composites have been developed using solution mixing with uniform dispersion of micro-fillers within the PVDF polymer matrix for electromagnetic interference
A strategy to achieve enhanced electromagnetic interference shielding at low concentration with a new generation of conductive carbon black in a chlorinated polyethylene elastomeric matrix.
TLDR
The belief lies in the promotion of scalable production of flexible and cost-effective K-CB-CPE composites of superior EMI SE to avoid electromagnetic radiation pollution.
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 71 REFERENCES
Inorganic nanotubes reinforced polyvinylidene fluoride composites as low-cost electromagnetic interference shielding materials
TLDR
Electromagnetic interference shielding effectiveness (EMI SE) was measured with vector network analyzer using waveguide sample holder in X-band frequency range and the potential use of the present MNT/f-MWCNT/PVDF composite as low-cost EMI shielding materials inX-band region is indicated.
Electrical conductivity and electromagnetic interference shielding of multiwalled carbon nanotube composites containing Fe catalyst
Thin and flexible composite films of raw or purified multiwalled carbon nanotube (MWCNT) with various mass fractions and poly(methylmethacrylate) (PMMA) were synthesized for electromagnetic
Mechanical and electrical properties of multiwall carbon nanotube/polycarbonate composites for electrostatic discharge and electromagnetic interference shielding applications
Home-made multiwall carbon nanotubes (MWCNTs) were used as a reinforcing conducting filler for a thermoplastic polymer, polycarbonate (PC) and the mechanical and electrical properties of the
Improved Electromagnetic Interference Shielding Properties of MWCNT–PMMA Composites Using Layered Structures
TLDR
The studies show that the composite can be used as structurally strong EMI shielding material and the mechanical properties of the composites were found to be comparable or better than the pure polymer.
Electrical conductivity and shielding effectiveness of poly(trimethylene terephthalate)/multiwalled carbon nanotube composites
Poly(trimethylene terephthalate) (PTT)/multiwalled carbon nanotube (MWCNT) composites have been fabricated to evaluate the potential of PTT composites as electromagnetic interference (EMI) shielding
Comparison of electromagnetic interference shielding properties between single-wall carbon nanotube and graphene sheet/polyaniline composites
Single-wall carbon nanotube/polyaniline (SWCNT/PANI) and graphene sheet/polyaniline (GS/PANI) composites were prepared by a simple alcohol-assisted dispersion and pressing process. The SWCNTs and GSs
...
1
2
3
4
5
...