Electroluminescent colloidal inks for flexographic roll-to-roll printing

@article{Huebner2008ElectroluminescentCI,
  title={Electroluminescent colloidal inks for flexographic roll-to-roll printing},
  author={Christopher F. Huebner and Joseph B. Carroll and David D. Evanoff and Yurong Ying and Brian J. Stevenson and Justin R. Lawrence and J. Michael Houchins and Alexandra L. Foguth and Jayne Sperry and Stephen H. Foulger},
  journal={Journal of Materials Chemistry},
  year={2008},
  volume={18},
  pages={4942-4948}
}
The academic and commercial interest in organic light-emitting devices is motivated in part by the potential of building devices utilizing simple and inexpensive fabrication routes, for example, commercial printing techniques. The focus on synthetically challenging small molecules and π-conjugated polymers for these devices is countered by the alternative of developing emissive materials that utilize an electroluminescent dye embedded in a hole and electron transporting host. In this effort, we… 

Nanoparticle Electroluminescence: Controlling Emission Color Through Förster Resonance Energy Transfer in Hybrid Particles

Electroluminescent (EL) polymers are attractive for developing all‐organic light‐emitting devices (OLEDs) due to the potential advantages that polymeric systems may offer in the large‐scale

Colloidal Crystal Lasers from Monodisperse Conjugated Polymer Particles via Bottom-Up Coassembly in a Sol-Gel Matrix.

This work coassemble monodisperse conjugated polymer colloids together with a sol-gel precursor to achieve encapsulated photonic crystals, which can be applied via inkjet printing and exhibit single line laser emission upon optical pumping.

Nanoparticles Based on π‐Conjugated Polymers and Oligomers for Optoelectronic, Imaging, and Sensing Applications: The Illustrative Example of Fluorene‐Based Polymers and Oligomers

Nanoparticles based on p-conjugated polymers and oligomers have received considerable attention for optoelectronic and biological applications due to their small size, simple preparation method, and

Photonic curing of silver paths on 3D printed polymer substrate

Purpose Despite almost limitless possibilities of rapid prototyping, the idea of 3D printed fully functional electronic device still has not been fulfilled – the missing point is a highly conductive

Utilizing Copper(I) Catalyzed Azide-Alkyne Huisgen 1,3-Dipolar Cycloaddition for the Surface Modification of Colloidal Particles with Electroactive and Emissive Moieties

The development of charge-transporting and fluorescing colloidal particles that can be directly printed into electroluminescent devices may result in a broad impact on the use of electrical energy

Novel Oxadiazole Containing Monomers for Polymeric Light Emitting Devices

Organic light emitting diodes (OLED) have received a great deal of attention in the research community in the past few decades. This work focuses on OLEDs utilizing the donor-acceptor operational

Wet etching of printed silver layers using an etch resist structured by flexography

Flexographic printing is a common technique in the production of printed electronics. Its flexible printing plates offer many advantages, especially regarding printing on rigid and fragile

Asymmetric electrically conducting element printed from aqueously dispersed pentacene nanoparticles

Pentacene is an organic semiconductor with promising electronic properties, but it has been severely limited in application due to difficult and expensive processing. (Microelectron Eng, 88, 9,

Piecewise fabrication of click functionalized core-shell particles

The functionalization of colloidal surfaces has been an area of scientific research for several decades. With the emergence of click reactions, particularly the copper(I) catalyzed version of Huisgen

References

SHOWING 1-10 OF 33 REFERENCES

Polyaniline coated poly(butyl methacrylate) core-shell particles

Polyaniline coated poly(butyl methacrylate) core–shell particles were synthesized and formulated into electrically conductive colloidal inks appropriate for use in roll-to-roll printing. Since the

Electroluminescence from a mixed red-green-blue colloidal quantum dot monolayer.

We demonstrate light emitting devices (LEDs) with a broad spectral emission generated by electroluminescence from a mixed-monolayer of red, green, and blue emitting colloidal quantum dots (QDs) in a

The electroluminescence of organic materials

This article provides a review about electroluminescence from organic materials and deals in detail with organic light-emitting diodes (OLEDs), light-emitting electro-chemical cells (LECs) and

Ink-jet printing of doped polymers for organic light emitting devices

Ink-jet printing was used to directly deposit patterned luminescent doped-polymer films. The luminescence of polyvinylcarbazol (PVK) films, with dyes of coumarin 6 (C6), coumarin 47 (C47), and nile

Molecular Design on Highly Efficient White Electroluminescence from a Single‐Polymer System with Simultaneous Blue, Green, and Red Emission

A highly efficient white electroluminescent polymer with simultaneous blue, green, and red emission is reported, developed using a dopant/host strategy by covalently attaching both a green- and a

Light-emitting diodes based on conjugated polymers

CONJUGATED polymers are organic semiconductors, the semiconducting behaviour being associated with the π molecular orbitals delocalized along the polymer chain. Their main advantage over

SYNTHESIS OF COLLOIDAL PARTICLES IN MINIEMULSIONS

▪ Abstract Miniemulsions are specially formulated heterophase systems in which stable nanodroplets of one phase are dispersed in a second, continuous phase. Because each of the nanodroplets can be

Single‐layer white light‐emitting organic electroluminescent devices based on dye‐dispersed poly(N‐vinylcarbazole)

Bright single‐layer white light‐emitting organic electroluminescent devices were developed by using dye‐dispersed poly(N‐vinylcarbazole) (PVK). The active layer consists only of one polymer layer