Electrochemically replicated smooth aluminum foils for anodic alumina nanochannel arrays.
@article{Biring2008ElectrochemicallyRS,
title={Electrochemically replicated smooth aluminum foils for anodic alumina nanochannel arrays.},
author={Sajal Biring and Kun-Tong Tsai and Ujjal Sur and Yuh-Lin Wang},
journal={Nanotechnology},
year={2008},
volume={19 1},
pages={
015304
}
}A fast electrochemical replication technique has been developed to fabricate large-scale ultra-smooth aluminum foils by exploiting readily available large-scale smooth silicon wafers as the masters. Since the adhesion of aluminum on silicon depends on the time of surface pretreatment in water, it is possible to either detach the replicated aluminum from the silicon master without damaging the replicated aluminum and master or integrate the aluminum film to the silicon substrate. Replicated…
8 Citations
High speed fabrication of aluminum nanostructures with 10 nm spatial resolution by electrochemical replication.
- Materials ScienceNanotechnology
- 2008
A high fidelity electrochemical replication technique for the rapid fabrication of Al nanostructures with 10 nm lateral resolution has been successfully demonstrated and opens up new possibilities in the fabrication ofAl-related nanoststructures, including the growth of long range ordered anodic alumina nanochannel arrays.
Biofunctionalization of Nanoporous Alumina Substrates
- Materials Science
- 2014
Anodic aluminum oxide (AAO) is a nanoporous material with well-defined hexagonally ordered, cylindrical parallel pores running straight through the material’s thickness. Owing to the transparency of…
Epitaxial two dimensional aluminum films on silicon (111) by ultra-fast thermal deposition
- Physics
- 2012
Aluminum thin films are known for their extremely rough surface, which is detrimental for applications such as molecular electronics and photonics, where protrusions cause electrical shorts or strong…
Custom-designed arrays of anodic alumina nanochannels with individually tunable pore sizes.
- PhysicsNanotechnology
- 2014
The ability to fabricate arrays of AAO templates with high-aspect-ratio nanochannels of tunable sizes arranged in a custom-designed geometry paves the way for the creation of nanophotonic and nanoelectronic devices.
Structural and optical characterizations of porous anodic alumina–aluminum nanocomposite films on borofloat substrates
- Materials Science
- 2014
Abstract. Structural and optical properties of the porous anodic alumina (PAA)–aluminum (Al) nanocomposite and the PAA-nanostructured films on borofloat substrates are studied. The films are…
Nanostructured Optical Waveguides for Thin‐Film Characterization
- Physics, Materials Science
- 2011
In this review, we summarize some of our efforts in parallel with other research groups' studies in designing, assembling, and structurally and functionally characterizing nanostructured materials…
Review article: Fabrication of nanofluidic devices.
- ChemistryBiomicrofluidics
- 2013
In this review, recent activities and achievements of nanofabrication for nanofluidic devices, especially those reported in the past four years are summarized and an inclusive guideline for materials and processes selection in the preparation of nanopores is provided.
Revealing High Fidelity of Nanomolding Process by Extracting theInformation from AFM Image with Systematic Artifacts
- Materials Science
- 2017
A contact mode atomic force microscopic (c-AFM) study has been carried out to realize the high fidelity of a nanomolding process where nanostructures fabricated on a silicon master are replicated…
References
SHOWING 1-10 OF 22 REFERENCES
Ordered anodic alumina nanochannels on focused-ion-beam-prepatterned aluminum surfaces
- Physics, Materials Science
- 2001
A combined process of electropolishing, focused-ion-beam lithography, and controlled anodization is used to fabricate anodic alumina films with ordered nanochannels. The ion beam is used to create a…
Highly ordered nanochannel-array architecture in anodic alumina
- Materials Science
- 1997
The development of the ordered channel array in the anodic porous alumina was initiated by the textured pattern of the surface made by the molding process, and growth of an almost defect-free channel…
Formation of Thick Porous Anodic Alumina Films and Nanowire Arrays on Silicon Wafers and Glass
- Materials Science
- 2003
A method for the fabrication of thick films of porous anodic alumina on rigid substrates is described. The anodic alumina film was generated by the anodization of an aluminum film evaporated on the…
Chemical modification of carbon-coated anodic alumina films and their application to membrane filter
- Chemistry
- 2002
Fabrication of gold nanodot array using anodic porous alumina as an evaporation mask
- Physics
- 1996
A highly ordered gold nanodot array was fabricated by vacuum evaporation using an anodic porous alumina membrane with through-holes of nanometer scale as a mask. This technique resulted in an orderly…
Uses of electroplated aluminum for the development of microstructures and micromachining processes
- Materials Science, Engineering
- 1997
In this paper, electroplated aluminum is explored as both a material for the fabrication of microstructures and use in the development of micromachining processes. A method for the fabrication of…
Uniformly Flat Gold Surfaces: Imaging the Domain Structure of Organic Monolayers Using Scanning Force Microscopy
- Materials Science, Physics
- 1997
A simple method has been developed for the production of gold surfaces which are uniformly flat over large areas. Silicon wafers serve as substrates for the evaporation of thin gold layers. A glass…
Self‐Ordering of Cell Arrangement of Anodic Porous Alumina Formed in Sulfuric Acid Solution
- Materials Science
- 1997
Self-ordering of the cell arrangement of the porous structure of anodic alumina has been studied in a sulfuric acid solution. Ordering of the cell arrangement was dependent on the applied potential,…
Adhesion of multilayer solder pads on silicon
- Materials Science
- 1997
Adhesion strengths of Al/Mo/Ni and Al/Zn/Ni-P multilayers on silicon were investigated with a pull test. Attempts were made to investigate the adhesion strengths of the structures on silicon for the…





