Electrochemical dissolution of chalcopyrite studied by voltammetry of immobilized microparticles

@article{Pikna2006ElectrochemicalDO,
  title={Electrochemical dissolution of chalcopyrite studied by voltammetry of immobilized microparticles},
  author={L'ubom{\'i}r Pikna and Ladislav Lux and Tom{\'a}{\vs} Matys Grygar},
  journal={Chemical Papers},
  year={2006},
  volume={60},
  pages={293-296}
}
The characteristics of anodic electrochemical dissolution of chalcopyrite (CuFeS2) powder in hydrochloric acid medium with sodium chloride have been studied. Cyclic voltammetry and chronopotentiometry of immobilized microparticles using paraffin-impregnated graphite electrode was employed. Present work is focused on electrochemical identification of chalcopyrite cathodic and anodic reaction products within the potential range of −0.7 to +0.8 V (vs. SCE) in hydrochloric acid solution containing… 

Figures from this paper

Voltammetric investigations of anodic dissolution of natural mineral chalcopyrite
Anodic oxidation of the natural mineral chalcopyrite from the Bor ore deposit has been studied by cyclic voltammetry in pure sulfuric acid solutions. At the obtained voltammograms, the appearance of
The influence of calcium fluoride on the electrochemical dissolution of chalcopyrite in sulfuric acid solution
The influence of calcium fluoride on the electrochemical dissolution of chalcopyrite at pH 2 was investigated. Experimental results show, when CaF2 concentration from 0 increased to 10 mg/L,
Electrochemical investigation of mineral electrodes in phosphate-buffered alkaline solution
Cyclic voltammetric methods have been applied to study the electrochemical behavior of the sulfide minerals in phosphate-buffered alkaline solution. The redox process of electrodes of sulfide ores
Transient film formation on chalcopyrite in acidic solutions
The transient time-dependent region characteristic of the anodic passive film formation on chalcopyrite in sulphuric acid solutions was studied by galvanostatic measurements. The occurrence of two
Anomalous Coating of Iron Microparticles by Ni–Co Layers in the 3D Stirred Heterogeneous System: Impedance Study
A high level controlled electrochemical metal plating of the homogeneous, uniform, and adhesive Ni―Co nano-/microlayer on an Fe microparticle powder substrate in the stirred heterogeneous system
Natural monocrystalline chalcopyrite and galena as electrochemical sensors in non-aqueous solvents. Part II: potentiometric titrations of weak acids in N,N-dimethyformamide and N-methylpyrrolidone
Natural monocrystalline chalcopyrite and galena as new indicator electrodes for the potentiometric titration of weak acids in N,N-dimethylformamide and N-methylpyrrolidone were used. The investigated
Optimization of Conditions for Preparation of Carbon Origin Solid Electrodes Modified with Carbon Nanotubes
A multi-walled carbon nanotubes (MWCNTs) were used for modification of two solid electrode types, glassy carbon electrode (GC), which is widely used for modification in electroanalysis, and, for the
Direct extraction of copper from copper sulfide minerals using deep eutectic solvents
Copper can be extracted from the main copper mineral, chalcopyrite, without the formation of hydrogen sulfide or sulfur dioxide.

References

SHOWING 1-10 OF 11 REFERENCES
Anodic dissolution of n-type and p-type chalcopyrite
The anodic dissolution of n- and p-type chalcopyrite (CuFeS2) was studied in both acidic sulphate and acidic chloride media under conditions relevant to chemical leaching, i.e., at temperatures >70°
...
...