Electric poling of carbon fiber with and without nickel coating

@article{Chung2020ElectricPO,
  title={Electric poling of carbon fiber with and without nickel coating},
  author={D. D. L. Chung and Xiang Xi},
  journal={Carbon},
  year={2020},
  volume={162},
  pages={25-35}
}

Electret behavior discovered in solder, specifically tin–silver

An electret is a permanent electric dipole exhibited by a material. This work provides the first report of the electret behavior of a solder, which is Sn–4Ag in the form of a fluxless unpoled wire of

Electric polarization and depolarization of solder, and their effects on electrical conduction

This work provides the first report of the effect of the dielectric behavior on the conduction behavior of solder. The lead-free solder studied contains 96 wt% tin and 4 wt% silver. The electric

A review to elucidate the multi-faceted science of the electrical-resistance-based strain/temperature/damage self-sensing in continuous carbon fiber polymer-matrix structural composites

  • D. Chung
  • Engineering, Materials Science
    Journal of Materials Science
  • 2023
This critical review provides the first coherent elucidation of the science behind electrical-resistance-based strain/damage/temperature self-sensing in continuous carbon fiber polymer-matrix

Introducing solder-based electronics, with solder functioning as resistor, capacitor, and power source

  • D. ChungXiang Xi
  • Physics
    Journal of Materials Science: Materials in Electronics
  • 2023
This paper introduces solder-based electronics, wherein solder functions as low-resistance (mΩ) resistor, low-capacitance (pF, permittivity-based) capacitor, and low-voltage (μV, electret-based)

The influence of fabrication parameters on the electrochemical performance of multifunctional structural supercapacitors

Multifunctional structural supercapacitors based on carbon fibre electrodes (CF) and structural electrolytes (SEs) can realise multifunctionality by simultaneously bearing load and providing

References

SHOWING 1-10 OF 52 REFERENCES

Electro-conductively deposited carbon fibers for power controllable heating elements

Carbon fibers are considered as one of the promising heating elements in various industrial applications because of their excellent thermal stability and electrical conductivity. In order to achieve

Preparation and Characterization of Nickel-Coated Carbon Fibers by Electroplating

Electroplating technique was applied to coat carbon fibers with nickel. Before plating, the initial fibers were pretreated to improve the wettability in bath. The electroplating parameters were

Electrodeposition of Nickel onto 12K Carbon Fibre Tow in a Continuous Manner

Nickel-coated carbon fibre (NiCCF) is an important composite material, which finds numerous engineering applications, primarily within: computer, telecommunication, automotive and military

Improving the electrical and electromagnetic shielding properties of conductive silicon rubber filled with Ni-coated carbon fibre by magnetic field

In this work, the effects of magnetic field induction on electrical and electromagnetic shielding properties of conductive silicon rubbers (CSRs) filled with Ni-coated carbon fibres (Ni/CFs) have
...