Elasto-acoustic modeling and simulation for the seismic response of structures: The case of the Tahtalı dam in the 2020 I˙zmir earthquake

  title={Elasto-acoustic modeling and simulation for the seismic response of structures: The case of the Tahtalı dam in the 2020 I˙zmir earthquake},
  author={Ilario Mazzieri and Markus Muhr and Marco Stupazzini and Barbara I. Wohlmuth},
  journal={J. Comput. Phys.},




Three-dimensional physics-based simulations (PBS) represent one of the most powerful techniques for the prediction of seismic wave propagation phenomena. Indeed, based on a highfidelity level of

Physics-based seismic input for engineering applications: a case study in the Aterno river valley, Central Italy

In this paper, we present 3D physics-based numerical simulations, in the near-source region at the regional scale, of the 2009, April 6, L’Aquila earthquake (central Italy), based on improved models

Earthquake Ground Motion in the Mygdonian Basin, Greece: The E2VP Verification and Validation of 3D Numerical Simulation up to 4 Hz

n a low‐seismicity context, the use of numerical simulations becomes essential due to the lack of representative earthquakes for empirical approaches. The goals of the EUROSEISTEST Verification and

Numerical and Empirical Simulation of Linear Elastic Seismic Response of a Building: The Case of Nice Prefecture

The structural motion of a tall reinforced concrete (RC) building on alluvial soil in Nice (France) is continuously recorded using accelerometers. The structural behavior of the building is studied

3-D numerical simulations of earthquake ground motion in sedimentary basins: testing accuracy through stringent models

SUMMARY Differences between 3-D numerical predictions of earthquake ground motion in the Mygdonian basin near Thessaloniki, Greece, led us to define four canonical stringent models derived from the

Near-Fault Earthquake Ground-Motion Simulation in the Grenoble Valley by a High-Performance Spectral Element Code

Near-fault effects are known to produce specific features of earthquake ground motion (such as long-period velocity pulses and directivity) that cannot be predicted by numerical approaches involving

Reservoir water effects on earthquake performance evaluation of Torul Concrete-Faced Rockfill Dam

Abstract This study presents earthquake performance analysis of the Torul Concrete-Faced Rockfill (CFR) Dam with two-dimensional dam-soil and dam-soil-reservoir finite element models. The Lagrangian

Earthquake ground motion modeling of induced seismicity in the Groningen gas field

A physics‐based numerical approach is used to characterize earthquake ground motion due to induced seismicity in the Groningen gas field and to improve empirical ground motion models for seismic

Goodness-of-fit Criteria for Broadband Synthetic Seismograms, with Application to the 2008 Mw 5.4 Chino Hills, California, Earthquake

Broadband synthetics obtained from scenario simulations of earthquakes with a frequency content between 0 and 10 Hz, referred to hereafter as “BBSs,” are playing an increasingly important role in

Validation of the Recipe for Broadband Ground‐Motion Simulations of Japanese Crustal Earthquakes

The robustness of broadband ground‐motion simulation can promote seismic‐hazard assessment. A broadband ground‐motion simulation technique called “the recipe” is used in the scenario earthquake