Elastic Phase-Strain Distribution in a Particulate-Reinforced Metal-Matrix Composite Deforming by Slip or Creep

  title={Elastic Phase-Strain Distribution in a Particulate-Reinforced Metal-Matrix Composite Deforming by Slip or Creep},
  author={Mark R. Daymond and Christian Balkenius Simon Winter Lund and Mark A. M. Bourke and David C. Dunand},
The macroscopic load-bearing capability of a composite is directly related to the strain partitioning due to load transfer between the component phases. Using neutron diffraction, the elastic mean phase strains were measured during in-situ loading of a Cu-15 vol pct Mo particulate metal-matrix composite (MMC) at 25 8C, 300 8C, and 350 8C. The degree of load sharing at each temperature was compared to finite-element (FE) results. The load transfer from the matrix to reinforcement is both… CONTINUE READING
7 Citations
7 References
Similar Papers


Publications referenced by this paper.
Showing 1-7 of 7 references

Acta Metall

  • P. J. Withers, W. M. Stobbs, O. B. Pedersen
  • mater., 38. L.M. Brown and W.M. Stobbs: Phil. Mag…
  • 1989
Highly Influential
8 Excerpts

An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge, United Kingdom, 1993

  • T. W. Clyne, P. J. Withers
  • for High-Temperature Chemical Calculations, T.B…
  • 1971
Highly Influential
5 Excerpts

GSAS – General Structure Analy - matrix strain hardening . The load transfer from the matrix sis System

  • R. B. VonDreele
  • 1994

in Fundamentalsof Metal Matrix Composites, S

  • D. C. Dunand, B. Derby
  • Suresh, A. Mortensen, and A. Needleman, eds…
  • 1993
1 Excerpt

Allison: in Residual Stresses in Composites: Modelling, Measurement METALLURGICAL AND MATERIALS TRANSACTIONS A VOLUME 30A, NOVEMBER 1999–2997

  • M.A.M. Bourke, J. A. Goldstone, M. G. Stout, A. C. Lawson, J.E
  • C.J. Smithels: Metals Reference
  • 1992
1 Excerpt


  • A. Levy, J. M. Papazian
  • Trans. A, 1990, vol. 21A, pp. vol. 38, pp. 1109…
  • 1991
1 Excerpt


  • A. J. Allen, M. T. Hutchings, C. G. Windsor, A. Andreani
  • 41. G.E. Dieter: Mechanical Metallurgy, McGraw…
  • 1985
1 Excerpt

Similar Papers

Loading similar papers…