Effect of thermal high-frequency surface hardening on the hardness and microstructure of bandsaw teeth

@article{Krilov2004EffectOT,
  title={Effect of thermal high-frequency surface hardening on the hardness and microstructure of bandsaw teeth},
  author={A. Krilov},
  journal={Wood Science and Technology},
  year={2004},
  volume={10},
  pages={199-208}
}
  • A. Krilov
  • Published 2004
  • Materials Science
  • Wood Science and Technology
SummaryExamination of the bandsaw teeth (1) untreated, (2) swaged and (3) treated by thermal high-frequency surface hardening method has shown that their average microhardness is 473 DPN (<46 Rc), 502 DPN (<49 Rc) and 836 DPN (>62 Rc) respectively.Scanning electron microscopy revealed that no significant change occurred within the crystalline microstructure of untreated and swaged specimens. The high-frequency treated specimen, however, has shown a definite structural modification of a very… Expand
5 Citations

Figures and Tables from this paper

Swablade design: Theory and practical application
  • A. Krilov
  • Engineering, Materials Science
  • Holz als Roh- und Werkstoff
  • 2007
Theoretical analyses have been developed for a range of parameters involved in the complex interaction between wood and cutting edge. The precise evaluation of optimal edge hardness and the practicalExpand
Feed speeds in cutting silicious hardwoods by bandsaw
  • A. Krilov
  • Engineering
  • Holz als Roh- und Werkstoff
  • 2007
A comparative assessment of different sawblade designs was undertaken to establish their relative potential in conversion of abrasive, silicious hardwoods. The feed speeds of an originally shapedExpand
A review of wood cutting tool wear literature
  • B. Klamecki
  • Materials Science
  • Holz als Roh- und Werkstoff
  • 2007
The current state of knowledge about wood cutting tool wear is assessed by reviewing the published work in this area. Research concerned with tool wear which deals primarily with the tool material,Expand
Sawblade design: theory and practical application
  • A. Krilov
  • Materials Science
  • Holz als Roh- und Werkstoff
  • 2007
It is generally well known that any alteration in sawtooth shape can influence blade performance considerably. While the effect of such general alterations in shape is seldom quantified in practice,Expand