Effect of testing conditions and microstructure on the sliding wear of graphite fibre/PEEK matrix composites

@article{Mody1988EffectOT,
  title={Effect of testing conditions and microstructure on the sliding wear of graphite fibre/PEEK matrix composites},
  author={Pari Mody and T. Chou and K. Friedrich},
  journal={Journal of Materials Science},
  year={1988},
  volume={23},
  pages={4319-4330}
}
The sliding friction and wear behaviour of unreinforced polyetheretherketone (PEEK) matrix and its unidirectional continuous and two-dimensional woven graphite fibre-reinforced composites were investigated. The operating wear mechanisms, as evinced by scanning electron microscopy of the worn surfaces, and the coefficients of friction and the wear rates changed considerably with the fibre reinforcement form and orientation. Sliding wear rates, on account of their extreme sensitivity to the… Expand
On the sliding wear performance of polyethernitrile composites
Abstract The wear behaviour of neat polyethernitrile (PEN) and its composites with different types and amounts of short and continuous fibre reinforcement was studied as a function of relativeExpand
The Role of Fillers on Friction and Slide Wear Characteristics in Glass-Epoxy Composite Systems
The comparative performance of Glass-Epoxy (G-E) composite systems interfaced with graded fillers has been examined. In this study, composite materials were experimentally investigated under varyingExpand
Effect of fabric geometry on friction and wear of glass-fibre-reinforced composites
Abstract Glass-fibre-reinforced poly(vinyl)-butyral-modified phenolic composites with reinforcements of woven roving, plain weave and satin weave glass fabrics were made. The friction and wearExpand
Effect of reinforcement morphology on high-speed sliding friction and wear of PEEK polymers
Abstract Advanced engineering polymeric materials such as poly-ether-ether-ketone (PEEK) are increasingly being used for challenging tribological application. Some of these applications involveExpand
Effects of steel counterface roughness and temperature on the friction and wear of PE(E)K composites under dry sliding conditions
Abstract The friction and wear behavior of virgin polyetheretherketone (PEEK) and of polyetherketone (PEK) and PEEK composites, including different types and amounts of fiber reinforcement and/orExpand
Study on friction and sliding wear behavior of woven S-glass fiber reinforced vinylester composites manufactured with different comonomers
The effect of variations in sliding velocity and applied normal load on the friction and sliding wear behavior of glass–vinylester composite (G–V) is studied by measuring the weight change andExpand
Effect of counterface surface roughness and its evolution on the wear and friction of PEEK and PEEK-bonded carbon fibre composites on stainless steel
Abstract The time-dependent variations in the dry sliding wear rate and friction of PEEK (450G and 100P) and carbon fibre-bonded PEEK (APC2) on stainless steel (316S16) have been investigated and theExpand
On wear synergism in hybrid composites
Abstract The dry-wear behavior of several polymer composite materials (unidirectional glass, carbon, or Aramid fibers in epoxy, PEEK, or PA matrix) sliding against smooth ball-bearing steelExpand
Effect of reinforcement on friction and wear of fabric reinforced polymer composites
Abstract Sliding friction and wear behaviour of plain weave fabric reinforced poly(vinyl butyral) modified phenolic resin matrix composites made with three different reinforcing fabric materials,Expand
Mechanical and tribological properties of glass–epoxy composites with and without graphite particulate filler
The objectives of this research article is to evaluate the mechanical and tribological properties of glass-fiber-reinforced epoxy (G–E) composites with and without graphite particulate filler. TheExpand
...
1
2
3
4
5
...

References

SHOWING 1-10 OF 11 REFERENCES
The abrasive wear behaviour of continuous fibre polymer composites
The dry abrasive-dominant wear behaviour of several composite materials consisting of uni-directional continuous fibres and polymer matrices was investigated. Seven materials were examined: neatExpand
The effect of carbon fibre reinforcement on the friction and wear of polymers
Thermosetting and thermoplastic polymers have been reinforced with carbon fibres of high strength and elastic modulus, and their friction and wear properties examined. During dry sliding againstExpand
On the wear behaviour of short-fibre-reinforced peek composites
Abstract The wear behaviour of short-glass- and carbon-fibre-reinforced composites of polyetheretherketone is investigated under extremely different types of wear loading. Sliding wear tests againstExpand
On the wear of reinforced thermoplastics by different abrasive papers
Abstract Single-pass two-body abrasion tests were run on unfilled and glass-fibre-and glass-sphere-filled polyethylene terephthalate sliding dry against different abrasive papers. The abrasive grainsExpand
Influence of adhesive and abrasive mechanisms on the tribological behaviour of thermoplastic polymers
Abstract Results of investigations on thermoplastic polymers are presented which can be interpreted by prevailing adhesive or abrasive mechanisms as well as by an overlap of different tribologicalExpand
Wear of commercially available plastic materials
Abstract This article reviews the data on the wear of commercially available plastic-based bearing materials. Much of these data were obtained during the course of a six-year project at NCT, using aExpand
Predicting Polymer Serviceability for Wear Applications
The following limitations of present polymer wear tests are discussed: it is difficult to get feedback on service life tests; pressure-velocity (PV) and wear (K) factor tests ignore counterface wearExpand
Wear mechanism in composites: a qualitative model
Abstract A qualitative model of wear in composite materials is presented. The model is based on the possibility of formation of loose wear particles as a result of debonding at the fiber/matrixExpand
The influence of lubrication in rectangular deep drawing
Abstract Rectangular deep drawing is a widely used process in the electrical, automobile, and aeronautical industries, in military engineering, etc. Despite its popularity little information isExpand
Wear of polymers: an essay on fundamental aspects
Abstract This paper reviews fundamental aspects of the wear of organic polymers and represents a personal view of the state of our current understanding of this subject
...
1
2
...