Effect of temperature on the electrical conduction and dielectric behavior of solder

@article{Yang2021EffectOT,
  title={Effect of temperature on the electrical conduction and dielectric behavior of solder},
  author={Wenyi Yang and D. D. L. Chung},
  journal={Journal of Materials Science: Materials in Electronics},
  year={2021},
  volume={32},
  pages={6511 - 6519}
}
  • Wenyi Yang, D. Chung
  • Published 8 February 2021
  • Materials Science, Physics
  • Journal of Materials Science: Materials in Electronics
Solder is widely used as an electrical conductor in electronics. This paper reports the effect of heating up to 70 °C on the conduction and dielectric behavior of solder (Sn–4Ag lead-free eutectic solder). The effect of temperature on the electric permittivity is reported for the first time for metals in general. The electrical resistivity increases linearly with the temperature, with the temperature coefficient of resistivity equaling 3.59 × 10–3/°C. The relative permittivity is 3.24 × 106… 

Effect of the cooling rate in solidification on the electrical behavior of solder

  • Wenyi YangD. Chung
  • Materials Science
    Journal of Materials Science: Materials in Electronics
  • 2021
Solder is widely used for electrical interconnections in electronics, and its use involves the melting and subsequent solidification of the solder. This paper reports for the first time the effect of

Electric polarization and depolarization of solder, and their effects on electrical conduction

This work provides the first report of the effect of the dielectric behavior on the conduction behavior of solder. The lead-free solder studied contains 96 wt% tin and 4 wt% silver. The electric

Effect of water on the dielectric behavior of solder

The electrical conduction behavior of solder is well-known, but the dielectric behavior has been reported only recently. Water in the environment commonly affects electronics performance. This work

Electret behavior discovered in solder, specifically tin–silver

An electret is a permanent electric dipole exhibited by a material. This work provides the first report of the electret behavior of a solder, which is Sn–4Ag in the form of a fluxless unpoled wire of

Dielectric Behavior of an Electrically Conductive Metal-Particle Thick Film

Electrically conductive metal-particle thick films made from paints upon volatile component evaporation are widely used for electrical contacts and interconnections. Prior work on the electrical

First report of the ferroelectric behavior of a metal, as shown for solder

Ferroelectric behavior is well known for nonconductive dielectrics. This work provides the first report of this behavior in a metal, specifically a solder (Sn–4Ag), which is highly conductive. As

Dielectric behavior discovered in electrically conductive thick film

Electrically conductive thick films are used for electrical interconnections in electronic packaging. They also serve as functional coatings for materials and structures. Although the conduction

References

SHOWING 1-10 OF 36 REFERENCES

Electric polarization and depolarization of solder, and their effects on electrical conduction

This work provides the first report of the effect of the dielectric behavior on the conduction behavior of solder. The lead-free solder studied contains 96 wt% tin and 4 wt% silver. The electric

Piezoelectricity, piezoresistivity and dielectricity discovered in solder

  • Xiang XiD. Chung
  • Materials Science
    Journal of Materials Science: Materials in Electronics
  • 2019
The performance and reliability of soldered joints are important for electronic packaging. This work provides the first observation of piezoelectricity (generating electric field and capacitance),

Effect of temperature and alloying elements (Fe and Bi) on the electrical resistivity of Sn–0.7Cu solder alloy

In this paper, we investigated the electrical resistivity as a function of temperature of the Sn–0.7Cu solder alloy with the addition of Fe and Bi. The electrical resistivity were characterized by

The creep properties of lead-free solder joints

This paper describes the creep behavior of three tin-rich solders that have become candidates for use in lead-free solder joints: Sn-3.5Ag, Sn-3Ag-0.5Cu, and Sn-0.7Cu. The three solders show the same

Effect of intermetallic compounds on the thermal fatigue of surface mount solder joints

The effect of Cu-Sn intermetallic compounds (IMC) on the fatigue failure of solder joints during thermal cycling has been studied. The samples consist of components [leadless ceramic chip carrier

Role of grain boundaries in the dielectric behavior of graphite

A microstructural study of the thermal fatigue failures of 60sn-40Pb solder joints

When an electronic package encounters thermal fluctuations, cyclical shear strain is imposed on the solder joint interconnections. The thermal cycling leads to a condition of thermal fatigue and

Pyropermittivity and pyroelectret behavior of graphite