Effect of plasma nitriding treatment on structural, tribological and electrochemical properties of commercially pure titanium.

Abstract

In this study, plasma nitriding treatment was applied to commercially pure titanium (Grade 2). Structural properties, electrochemical and tribological behaviours of the nitrided pure titanium specimens were comparatively investigated. Microstructure and morphology of the plasma nitrided specimens were analysed by X-ray diffraction and scanning electron microscopy. Furthermore, corrosion tests were conducted in Ringer's solution, which represents a human body environment, to determine electrochemical properties. Then, tribological and frictional properties were investigated using pin-on-disc tribometer, and a micro-hardness tester was used to measure the hardness of the coatings. The results showed that plasma nitrided specimens exhibited higher surface hardness than the untreated specimens did. In addition, the plasma nitrided specimens at 700 °C presented significantly better performance than the other plasma nitrided specimens (at 500 °C and 600 °C) under dry wear conditions. Moreover, corrosion test results showed that corrosion behaviours of untreated and nitrided samples had similar characteristic.

DOI: 10.1177/0954411915621342

10 Figures and Tables

Cite this paper

@article{elik2016EffectOP, title={Effect of plasma nitriding treatment on structural, tribological and electrochemical properties of commercially pure titanium.}, author={İlhan Çelik and Mehmet Karakan}, journal={Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine}, year={2016}, volume={230 2}, pages={145-52} }